My Fuzzy Controller is responding very slow, what is the reason. Do scaling factor is must for fuzzy.
Is there any method to find scaling factor?
Really frustrating slow response of fuzzy.
Hi Pankaj,
What is the scaling factor?
Do you really need the scaling factor?
What do you expect to see after adding the scaling factor?
You can check also the number of rules that include.
Maybe they are too much and redundant
The scaling factor as a control gain can be integrated as a mf
I have simulation data of sprung mass acceleration (A) vs time (t) in vertical direction for quarter car model. The data is taken as output from “to workspace” block of Simulink. I want to convert...
06 July 2019 5,538 9 View
I have simulated a 2DOF Quarter Car Model (Figure Attached) for Step Input of 0.1m. The Weighted RMS acceleration obtained is 4.768 m/s2 . The Acceleration plot on Time Scale is also attached. I...
05 June 2019 5,436 3 View
I am preparing the matlab codes for below mentioned seven interlinked equations: A = Ga * SI (1) OC = Goc*SI (2) SI = 2*t (3) ES= 3*t (4) dGa/dt = (alpha*SI)* (ES-A) (5) dGoc/dt = (betaa*SI)*...
10 November 2018 3,013 3 View
A 2DOF Simulink Model Under Step Input of 0.1 m (Bump) is simulated as shown in figure attached. The continuous RMS block is used to find RMS value and stabilises at value of 0.9 m whereas simple...
08 September 2018 3,894 0 View
Research Paper Attached here discuss about Simulink Model of Random Road Profile Generator . The Model has Simulink Block of Random Number, how this Random number values will be calculated for...
06 July 2018 5,645 0 View
I know the value of PSD of a white noise, I need to calculate height of PSD to put that value in Band Limited White Noise block of Simulink. How to calculate Height of PSD?
06 July 2018 9,409 4 View
My Simulink Model is not generating Random Road Profile as Per ISO 8608 for road Class-D. How to calculate or find values of Random Number Block, Fig.1 and Band Limited White Noise, Fig.2.
06 July 2018 9,238 0 View
how can I solve this equation by ode45 matlab code? Here z and zdot vary with time (t = 0:0.02:3) and simulation is also made for 3 seconds. My code gives answer different than that of Simulink...
05 June 2018 8,281 7 View
01 January 1970 455 1 View
Is there any Simulink model for Inverse MR damper is available? Or any simple Inverse MR damper model which can be easily created Simulink.?
01 January 1970 1,527 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.
08 August 2024 3,161 0 View
In order to show people the beauty of control and enhance enthusiasm for learning control theories, are there any good simple systems or platforms to recommend?
05 August 2024 10,034 1 View
Hi guys If anyone is currently working on aging cells, you guys would like to give me some advice. I'm testing against biomarker (SA-beta-Gal), I encountered a false positive in the control group...
02 August 2024 6,735 1 View
I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from experts in the field. If you are an expert or researcher working on...
02 August 2024 4,474 2 View
All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.
01 August 2024 589 4 View
I have seen plenty of existing works on applied Reinforcement Learning (RL) policies for optimized scheduling in IoT networks including Q-learning, DQNs, and the newer ones including PPO for...
01 August 2024 8,754 2 View
We have a lateral flow test on Sartorius 140 NC. The conjugate is gold-monoclonal antibody. Using different control lines (GAM, protein A, protein G) we get a very strong leading edge with reduced...
31 July 2024 4,510 3 View
I need a reliable source or an example supported by excel sheet to understand Fuzzy Vikor?
27 July 2024 5,916 1 View
Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...
25 July 2024 2,920 11 View