What would be the best Chemical Method to graft Zinc oxide NP on the surface of PEEK ?

Dahe kh @Dahe-Kh

01 January 1970 0 6K Report

I would like to know how can I coating the PEEK with NP of ZnO , on the surface or inside the PEEK .

Thank you

Badges
Science topic

More Dahe kh's questions See All

How to prepare 100ml solution of 2.5% Glutraldehyde in 0.1M PBS(phosphate buffer) pH about 7, from 25% Glutradehyde and 1X PBS?

final solution volume is 100ml

03 June 2024 417 0 View

How can i use hexamethyldisilazane(HMDS) for drying instead of Co2 and freez drying for SEM analysis of rice anther and pollen?

could you please help with a protocol? should i do it directly on the aluminium stub after dehydration with 100% alcohol or not? should i release the pollen or whole anther is better and dehisce...

03 June 2024 4,793 8 View

What is the best way to detach macrophages ?

I am doing BMDMs and I can not detach macrophages , they are so sticky and trypsin is not enough to detach them. would scrapper works or will it destroy the cells ?

07 March 2024 2,502 3 View

What is the best sampling method when dealing with a small population?

I am conducting an exploratory study following a mixed-method approach. The population I am working with is small (20 to 30 people). What sampling method would you recommend to make the best out...

14 February 2024 9,759 3 View

How much volume of stock should be pipetted to get 1L medium with 5 µM hormone??

If I have 200 ml of stock hormone IBA (containing 1.000 μM). How much volume of stock should be pipetted to get 1L medium with 5 µM IBA?

28 November 2023 8,521 1 View

What device used measure the carrier lifetime in wide band gap semiconductors?

Please suggest me, which device used measure the carrier minority, majority and recombination lifetime in wide band gap semiconductors? Thank you in advance.

21 August 2023 413 4 View

I have Identified 13 key Genes using Cyto Hubba(cytoscape app) methods Betweenees and Stress. How can I Generate ROC curve from those Genes?

My research e related to Intellectual Disability (ID). There are 8 case and 3 controls

08 June 2023 8,823 0 View

What would be the most suitable experimental design to select a most suitable type of bio fertilizer level for five paddy varieties?

This experiment would be conducted with: 1. Five paddy varieties 2. 4 levels of bio fertilizer (ex: control, 100, 200, 300) 3. A field experiment was conducted to study the growth and yield of rice.

15 September 2022 8,874 3 View

Walking beam furnace?

Dear Scholars, I would be really thankful if someone introduce a useful book regards to walking beam furnace and controlling temperature for hot shape rolling

08 August 2022 9,676 0 View

Is translation memory a good CAT tool to support machine translation?

Do you have any relevant recent studies?

24 July 2022 502 2 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

How to increase simulation box size?

We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...

08 August 2024 4,842 0 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

How to heat polymer for about 130° without oil bath ?

is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it

06 August 2024 947 1 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View