Simulation of hybrid cooling system.
Some methods are suggested for your information:
1) Hydrophobic coating;
2) Simple surface fin structures;
3) Increase evaporating temperature;
4) Proper fin spacing (not too narrow); Proper air velocity
5) Proper defrost operation control;
Thank you jeff wang sir for your valuable answer.
Mathematical model of desiccant dehumidifier.
07 August 2019 7,087 8 View
Simulation of desiccant based air conditioners.
01 February 2019 1,989 4 View
Simulation of desiccant wheel.
01 February 2019 3,169 4 View
Artificial neural network.
31 December 2018 958 8 View
ANN.
31 December 2018 5,904 0 View
31 December 2018 1,236 0 View
Optimization of desiccant wheel.
31 December 2018 5,001 8 View
31 December 2018 2,515 0 View
Simulation of air conditioning
31 December 2018 2,779 1 View
31 December 2018 5,872 0 View
The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...
03 March 2021 5,857 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
Please provide Book Title and author name
02 March 2021 9,059 3 View
01 March 2021 3,905 5 View
Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...
01 March 2021 2,622 3 View
The resultant solid was partitioned three times with 250 ml of petroleum ether (40-60/c) to remove any fatty material and evaporated to dryness.
28 February 2021 9,464 2 View
Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.
28 February 2021 3,640 3 View
I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...
27 February 2021 8,128 1 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
As random sampling means that everyone in the population have an equal chance to be chosen, can it have inclusion criteria? My research participants have been chosen based on the inclusion...
26 February 2021 6,905 10 View