How do we increase the resolution of an image?

I have an image having DPI value 100 but the publisher want it to be of atleast of 300 dpi...so what will be the solutions..please answer as soon as possible. Thanks

07 August 2018 5,796 5 View

What is the significance of cyclic voltammetry (CV) measurements in the field of counter electrodes for DSSCs?

I have prepared three carbon based electrodes like graphene, MWCNTs, GRAPHENE OXIDE etc. and need to note CV of these. Please tell is this measurement is necessary for these counter electrodes...

10 November 2017 6,677 4 View

Is it suitable to use drop casting method for depositing films of counter electrodes of DSSCs?

I am to deposite films of MWCNTs and graphene for counter electrode for DSSC. Actually I need some research papers that can explain this technique in a detailed way....thanks in advanced.

09 October 2017 3,061 3 View

Can cyclic voltammerty is possible for powdered samples without coating films?

If yes, please suggest me the way..for doing this. If NO then why?

06 July 2017 1,475 2 View

What is the basic theory behind Tauc's Law for optical band gap calculation?

Please answer with literature references. Thanks in advance.

01 February 2017 2,067 3 View

What is the theory on which Tauc plot is based upon for band gap measurements?

01 February 2017 3,334 5 View

Can we find porosity values of thin film using ImageJ software?

01 February 2017 7,764 5 View

Where does the HUMO and LUMO levels locate in Black Dye?

i want to know the exact energy level values..please attach some papers regarding use of black dye in DSSC.

01 February 2017 7,664 0 View

What are the absorbance regions of black dye as i have used it in DSSC? can i get some papers?

I have used N749 black dye as sensitizer in DSSC.

09 October 2016 5,298 2 View

What is the maximum reported efficiency of DSSC device with carbon materials as counter electrodes?

So As to compare platinum CE device with the carbon materials CE like carbon nanotubes, graphene etc.

06 July 2016 4,513 3 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What pH condition required to coat APTES on silica coated Fe3O4?

It's a hydrolysis reaction, which may produce by either acid or base-catalyzed reaction. so can anybody help me with this, which condition is suitable for this reaction?

26 February 2021 1,760 8 View