Can cyclic voltammerty is possible for powdered samples without coating films?

More Bulkesh Siwach's questions See All

How do we increase the resolution of an image?

I have an image having DPI value 100 but the publisher want it to be of atleast of 300 dpi...so what will be the solutions..please answer as soon as possible. Thanks

07 August 2018 5,925 5 View

What is the significance of cyclic voltammetry (CV) measurements in the field of counter electrodes for DSSCs?

I have prepared three carbon based electrodes like graphene, MWCNTs, GRAPHENE OXIDE etc. and need to note CV of these. Please tell is this measurement is necessary for these counter electrodes...

10 November 2017 6,851 4 View

Is it suitable to use drop casting method for depositing films of counter electrodes of DSSCs?

I am to deposite films of MWCNTs and graphene for counter electrode for DSSC. Actually I need some research papers that can explain this technique in a detailed way....thanks in advanced.

09 October 2017 3,170 3 View

What is the basic theory behind Tauc's Law for optical band gap calculation?

Please answer with literature references. Thanks in advance.

01 February 2017 2,246 3 View

What is the theory on which Tauc plot is based upon for band gap measurements?

Please attach me some papers regarding this..

01 February 2017 3,476 5 View

Can we find porosity values of thin film using ImageJ software?

How we can find porosity values of thin films using this software? please write the steps if someone have used it.

01 February 2017 7,963 5 View

Where does the HUMO and LUMO levels locate in Black Dye?

i want to know the exact energy level values..please attach some papers regarding use of black dye in DSSC.

01 February 2017 7,795 0 View

What are the absorbance regions of black dye as i have used it in DSSC? can i get some papers?

I have used N749 black dye as sensitizer in DSSC.

09 October 2016 5,414 2 View

What is the maximum reported efficiency of DSSC device with carbon materials as counter electrodes?

So As to compare platinum CE device with the carbon materials CE like carbon nanotubes, graphene etc.

06 July 2016 4,665 3 View

What about the stability of DSSC at high temperatures?

is commercialization of DSSC possible?

03 April 2016 1,357 8 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,810 3 View

How to build my own lab made four point probe set up?

Hello, I'm trying to measure the conductivity of semiconductor films but since I don't have a commercial four point probe set up I would like to build one on my own in my lab. I have generators,...

30 July 2024 906 2 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

Does anybody know why my chitosan/pva/gelatin hydrogel dissolve in PBS?

My final research is about making chitosan/pva hydrogel for wound healing using gelatin as crosslinker. Last month, i made the thin film hydrogel and it turn well. It was okay. Last week, i make...

28 July 2024 2,794 6 View

What is the main used curing agent for epoxy based coating?

I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose

25 July 2024 438 3 View

Mechanochemistry: ball to powder mass or ball to powder volume?

I run mechanochemical reactions that involves the use of a large amount of catalyst (1:1 molar ratio to the reactant). When I try to understand the effect of amount of catalyst on the reaction, I...

23 July 2024 9,938 1 View

How do you get pure primary macrophage cell culture?

I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...

23 July 2024 4,074 2 View