We produce pulp from cotton and now, there is a problem for separation remain cotton knots from obtained pulp. What are possible solutions to solve this problem, Deflaker,Centrifugal Cleaner, Turbo separator,..?
Dear Pejman,
How these knots are produced? If they are produced from long fibers, I do not think we can open it as I visualize. To have no knots we need to cut them first through refiners or any technology can cut the fibers. Other wise we develop knots no matter what.
Good luck
Mousa
Dear Mousa,
We produce pulp from second cut cotton linter. We have a problem to remove industrially linter knots that related to cottonseed meal after prebleaching the pulp.
Finally, we're going to produce industrial dissolving pulp from this pulp. What sequence of instruments do you recommend for this material? Pulping...Refining ... Prebleaching...Deflaking.. Coarse screening... Fine screening... Centrifugal cleaner.
With best regards
Pejman
- Badges
- Science topic
- Similar topics
- Engineering
- Petroleum Engineering
- Gas