What is the simplest way to perform coating of glass chips with alumina?

07 July 2014 1 6K Report

I have tried to coat the glass chip with silica sol gel and then applied alumina sol. However, the silica sol after drying up forms flakes and comes out.

Layth Mokhles

You can use thermal evaporation process (Edward Speedvac Unit) to perform the coating on glass chips.

Badges
Science topic

More Anil Kumar Meher's questions See All

Is it possible that hydrogen peroxide can oxidize paper?

Curious to know

02 March 2015 2,494 5 View

What is a simple way to extract carotene from carrot?

I need to perform some tests with extracted carotene.

11 December 2014 9,915 8 View

Are there ways to perform chemical modifications of paper (Kimwipes)?

I assume paper is mostly cellulose, containing lots of hydroxyl groups. Can it be chemically modified for interaction with specific molecules?

09 October 2014 8,734 5 View

Can anybody tell me how to prepare a thick layer of titania by sol gel route?

Simple application of sol gel does not adhere to the surface of substrate (glass). Upon spin coating a firm layer could be obtained. However, it is very thin. I am looking to make a thick layer as...

06 July 2014 4,009 3 View

How does one obtain an alumina coating over a glass chip by the sol gel method?

Looking for a simple and straightforward method.

06 July 2014 7,703 1 View

What is the pKa value of Bradykinin?

Curious to find out.

05 June 2014 6,229 2 View

Do you have a simple protocol for on target desalting of peptides over a hydrophobic surface?

For samples dried over a hydrophobic surface and washed with aqueous solvent.

04 May 2014 7,932 2 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

Hello researchers Is this a random laser or just fluorescence?

I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.

09 August 2024 9,894 2 View

Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

How to calculate CCS for Sodiated adduct ions and Multiply Charged Ions?

I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...

08 August 2024 8,329 0 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,810 3 View

Why is my ASO degraded quickly on agarose gel?

I have been working on Red blood cell-derived extracellular vesicles as Antisense Oligonucleotide (ASO) carriers. We normally run agarose gel to quantify the loading efficiency. I used naked ASO...

06 August 2024 3,130 2 View

Nano Orange protein quant on the Quantus fluorometer?

Is anyone here using the Thermo Fisher Nano Orange kit for protein quantification, and detecting the fluorescent signal on the Promega Quantus? We are struggling to make sense of the standard...

05 August 2024 8,946 3 View

Binder for ZnO nanoparticles in graphite paste electrode?

I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?

03 August 2024 4,624 3 View