Dear Wadhah Alkhafaji,

I do not have information about the requested works (“a reference or a research paper dealing with the application of residual gravity and magnetic field data”)… Perhaps my suggestion will be useful for you.. In your profile seems well that you have BsC. from Geology and MsC. and Phd. from geophysics… Onto base of your qualifications you are ready to resolve these problems the best paper is written down in Stony Book of Nature (The terms was gotten from Albanian Geologist Engineer Vedat Shehu)… You need to re-back to poor Geological thinking; using such of methods which give back most accurate the studied inner structure…

in these case you need a good geo-structural geo-tectonical and geomophologicl interpretation of the studied field; geophysically you need 2-3 D seismically profile, and satellite images (maps) and if you have in the studied field drilled bore holes for Oil-Gas explorations-explorations (they are welcome) and after it (or other information ) you are able to use with a increase efficiency gravity and magnetic residual data. (1)

Best Regards,

P.S. 1. The next remark will made in connection with the gravity… In 2007, 2009, I have published a work (Bolygóerrozió; 2007/5. Hajdúszoboszló, SZOKIMONDÓ; English translation made by me: Planet-erosion : http://planeterosion.blogspot.hu/... Booklet: Tényekkel igazolható a gravítáció valós oka, 2009, Hajdúszoboszló here  https://www.researchgate.net/publication/277364319_Tenyekkel_igazolhato_a_gravitacio_valos_oka  actually I do not have ready English translation : The real cause of gravity can be demonstrated with fact…)… I think with such of gravity’s interpretation can got better geophysical results than with the accepted theory… of course needs tools from the main comment…

Article Tényekkel igazolható a gravitáció valós oka

Dear Mr. Horvath, 

Thanks for your answer , but unfortunately you didn't mention any of those specific geophysical methods , specifically which applied to calculate the depth to the center of a buried deep seated fault plane. Sometimes geological information or boreholes ones are not sufficient to depend on specifically in depths exceeded 3Km or more.

Regards. 

hi

the best method is Euler deconvolution. Also there are some improved method such as tilt angle or analytic signal. Moreover using gravity or magnetic fields inverse modeling.  There are many paper in this issue. Please consider attachment.

Prof. Chakracarthi has been published some paper for the fault modeling.

Ata

 Thank you Mr. Ata for the answer.