I want to focalize a partially ionized boron then I have to calculate the trajectory. I know its rotation speed and also the number of charges (1 or 2), I can calculate the electrostatic force but not the magnetic one.
The idea is to use a large asteroid and impact it again the desert to spread some powder at upper part of the atmosphere and create some shadow to lower Earth temperature some degrees. Of course...
08 September 2019 7,146 7 View
Our fusion reactor Miranda have dozens of parameters to adjust to obtain reactions. Our simulator uses an easy algorithm to simulate our models running 16 threads but it is difficult to change...
09 October 2018 587 7 View
We have calculated the end cost of the m3 in a desalination plant with help of our designs. We calculated the cost with 70% of the desalination cost is energy and for a 4kwh/m3. The main problem...
07 August 2018 4,986 0 View
I am looking ones that works at vacuum. Good thermal coefficient ceramics are OBe and ALN. The first one is poisonous. The second one can be obtained by burning aluminium in liquid nitrogen, but I...
05 June 2018 8,842 2 View
To open the discussion I propose the following rules: 1. Must have an open version loaded at a free and stable site as google or researchgate as long as the knowledge must be shared by the...
31 December 2017 6,967 0 View
Pulsotron-500K-Mag has a donut thin form. Outside coils will reach peaks of some dozen kiloamps only (between 1khz and 15Mhz). The problem if aluminium would create eddy current losses, copper...
11 December 2017 9,736 0 View
I should like send RF (>200-Mhz) to a magnetic antenna to look for variation of inductance due the presence of plasma. Theorically 200Mhz should give us enough length and time resolution but I...
11 December 2017 1,526 11 View
Until now I used railgun technology in pulse fusion tests, but unfortunately we had to move to design space and military railgun launchers Recently I tested a railgun, but I can measure bullet...
03 April 2015 8,302 9 View
In my last technical article that it is attached below, I made derivative of matrix with respect other: dM/dX (where X and M are matrices), I need to know if it is a new concept.
01 February 2015 7,528 6 View
I read articles that said that graphene is a superconductor that would revolutionize the world. I need some sheets of that, but commercial graphene specifications are >16 ohms "squared", so a...
09 October 2014 7,603 7 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
How to develop investments in renewable energy sources?
08 August 2024 5,112 3 View
If we map as a continuous motion an ionising electron (beginning its journey at n=1) in an H atom, a specific hyperbolic spiral appears (see animation). When we solve this spiral formula, we find...
07 August 2024 5,343 2 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
The stability of the Solar System is a complex subject that blends the classical framework of Newtonian mechanics with the modern insights provided by General Relativity (GR). Understanding this...
07 August 2024 2,569 1 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...
06 August 2024 1,367 3 View
Hello, everyone. I have tried to determine carrier motilities of some materials, by Density Functional Theory, using Quantum ESPRESSO. There are a few methods to do it, like a package called...
04 August 2024 8,894 1 View
Hello. Thanks for your consideration to see my question. Recently, I conducted XPS anaylsis of g-CN that is prepared from thermal polycondensation of DCDA, so-called conventional bulk-g-CN,...
30 July 2024 9,824 2 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View