What is the emissivity of 17CrNiMo6 at 50 deg C to 150 deg C?

30 September 2023 0 6K Report

I would like to set the emissivity of the infrared thermometer to measure the temperature. What is the emissivity of the material 17CrNiMo6 at 50 deg C to 150 deg C?

Badges
Science topic

More Manikanta Reddy's questions See All

Dear all, Iam currently working on Dc Microgrid model for electrical vehicle charging. Can any body give good IEEE research paper on this topic?

please give any suggestion?

04 February 2021 4,837 5 View

What does the change in D-peak position in Raman spectroscopy of carbon materials indicates?

We have carried out high-pressure Raman characterization on some of our samples. After fitting, I have observed a change in D-peak position with increasing pressure. What does this change...

20 January 2021 853 3 View

PSFB control signal?

Hi everyone iam facing a problem to give control signal for switches in design of PSFB converter in matlab simulink. Anybody's help will be appreciated.

14 December 2020 6,021 3 View

What are the alternative to the pozzolanic materials to in concrete to enhance the durability of concrete?

As of now, Only industrial wastes were using as pozzolanic materials in concrete to enhance the durability of concrete. Can any once suggest me the alternatives of those materials?

11 October 2020 3,569 4 View

Can any one suggest me the dielectric constant of Gold and Co3O4 at room temperature ?

i have a question regarding dielectric constant of gold,cobalt oxide (co3O4) and n-tpe silicon . i find only one publication on this issue showing dielectric function cobalt oxide(CoO) 12.9 and...

02 October 2020 9,138 4 View

Eupergit beads for enzyme immobilization?

We are looking to immobilize some of our enzymes on Eupergit beads. I was wondering if you know any commercial supplier of Eupergit beads?

28 September 2020 5,664 3 View

Can somebody kindly suggest a good FEM software for the numerical solution of stochastic PDEs?

Please kindly suggest some good FEM softwares for the numerical solution of both time-dependent and time-independent stochastic PDEs.

28 September 2020 6,598 4 View

How to run Seismic analysis for the following model in OpenSees..?

I have developed a 3 bay 5 story 2D frame in Opensees but I have problems with element load and application of seismic load in Opensees using an acceleration file. I always got an error namely...

27 September 2020 5,885 4 View

How can we evaluate the conductance of a constant power load (CPL)?

Any CPL is modeled with a current source in parallel with negative resistance. How do we evaluate the negative resistance, if we know the constant power consumed by the load?

19 September 2020 6,188 3 View

How to learn the modelling of RC beam subjected to 4 point bending in Ansys Mechanical APDL?

I need to model a reinforced concrete beam subjected to 4 point bending. I also need to plot the load vs displacement at mid span and compare it with the experimental data. Bond between concrete...

10 September 2020 9,004 4 View

What statistical test should I use if I want to compare values of temperature taken at aural, forehead and inner wrist ?

I basically want to see if there is a difference between these sites. Especially between the forehead and inner wrist as many patients are not very happy with temperature reading taken at the...

05 October 2020 3,151 12 View

What is the best way to determine if data collected by 3 instruments differs significantly?

Hello everyone, I am trying to statistically analyze whether data from 3 thermometers differs significantly. At the moment, because of COVID-19, several control points have come up at the...

04 June 2020 1,940 4 View

Is there a statistical Analysis for determining significant difference between data registered by thermometers?

Hello everybody, Is there, by any chance, a statistical method that might help me determine whether two thermometers' data average differ significantly from one another? Since our laboratory does...

17 May 2020 5,693 2 View

What is a good monitoring system for CO2 incubators?

I would like to monitor the environment within a CO2 incubator used for cell cultures. I am most interested in monitoring its temperature (37 C) and CO2 levels (5%). I would like to be able to get...

01 February 2020 8,899 2 View

Do we have a relationship between emissivity of material and temperature?

Not the radiative heat transfer (Q=sigma*A*e(Ta^4 - Tb^4)) equation. In other words, can we directly conclude, for a given emissivity this will be your temperature? Like the Infra Red...

05 December 2019 6,670 1 View

Is there any authomatic devise or method to measure a resistance from temperature dependence in semiconductors (VO2)?

For now, the method we use to measure resistance from temperature dependence in vanadium dioxide (VO2) is really slow: you need to look at oscilloscope and thermometer and write down the numbers...

28 June 2019 4,107 3 View

How much heat does an 75W aquarium heater immersed in oil transmit to a room of known dimensions?

I ran an experiment using model buildings approximately 0.068m3 in volume, with a 5l bottle of oil and a 75W aquarium immersion heater submerged in them. The temperature set point on the immersed...

31 December 2018 9,133 3 View

Band broadening in sequencing gels: How to avoid?

Hello all, I have been running sequencing gels for quite some time now and I find that the bands start broadening as the dye reaches the halfway mark (pic attached). I followed the publications...

10 November 2018 9,225 9 View

Band broadening in sequencing gels: How to avoid?

Hello all, I have been running sequencing gels for quite some time now and I find that the bands start broadening as the dye reaches the halfway mark (pic attached). I followed the publications...

03 November 2018 4,008 8 View

Are my adipose tissue samples still viable after being in a -80 that went down on us over the weekend?

I have some human adipose tissue samples. -80 C went down on us over the weekend. We are unsure of how long the freezer was actually down for. When we got it back on the outside thermometer on the...

07 August 2018 6,532 6 View