Statistical analysis using RSM is an older practice which has been already well reported and well documented?

What different we can carried out in this?

10 November 2016 1,769 4 View

How can we co-relate the cutting force with the cutting energy?

I want to know the basic relation of cutting force with the cutting energy.

10 November 2016 9,905 4 View

Regarding some turning experiments?

09 October 2016 8,915 8 View

How root mean square (Rq) and maximum peak to valley (Rz) values contributing surface measurement apart from average surface roughness (Ra) ?

Can anyone suggest it?

09 October 2016 7,215 3 View

How can we calculate surface roughness during turning?

Based on cutting speed, feed rate, depth of cut and cutting zone temperature.

11 December 2014 6,254 6 View

What is the effect of recrystallization temperature on microstructre and micro hardness?

Cooling analysis effect on metallurgical behavior?

11 December 2014 5,529 9 View

What is the best parameter design or matrix used to perform a minimum number of experiments, if I have 3 parameters and their 3 levels?

All possible combinations should be used.

11 December 2014 1,602 2 View

How can I reduce a chattering in CNC lathe machine during turning of operation?

How we can select the diameter and length of workpiece during turning operation to reduce chattering effects?

10 November 2014 1,790 5 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

LOAD DISPLACEMENT CURVES Stiffness increasing in ANSYS non linear analysis. HOW CAN I CORRECT IT?

Hi. I am doing non linear FE analysis using a new material beam under flexural 2 point loading using ANSYS. I have defined a bilinear material model. The solution has converged. In results I am...

01 March 2021 9,911 3 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

How relevant is Mini slump cone?

for all the rheology researchers, my question is, how relevant is a mini slump cone (smaller than a standard 50 cent rheometer). currently based on testing, the thickness of slumped material is...

26 February 2021 3,668 1 View

How can I set up a good fit SEM model in AMOS?

I am trying to make an SEM model in AMOS for my dissertation but having some trouble with getting a good fit. I am looking for relationships between self-efficacy reported on a Likert scale and...

26 February 2021 8,642 4 View

Stress/strain tensors decomposition ???

25 February 2021 6,760 1 View

How to reduce residual stresses in MD simulation?

I am working on a preparation of representative polymeric structures of some popular polymers, such as polyimide or PTFE for MD simulation, during which a single nitrogen or oxygen atom will be...

24 February 2021 8,105 3 View

Suggestions for occupational stress surveys?

I am currently writing a masters thesis on reasons for occupational stress in the early childhood classroom, and want to include a short survey assessing participants work-related stress levels. I...

24 February 2021 8,678 2 View

The most suitable method to calculate the stress intensity factor in the presence of contact between the crack lips?

I'm trying to study cracked structures under a compressive load taking into account contact between the crack lips. I would like to know if the method of extrapolation by displacement remains...

21 February 2021 8,694 4 View