Munish Gupta

9 Questions 28 Answers 0 Followers

Questions related from Munish Gupta

How can we co-relate the cutting force with the cutting energy?

I want to know the basic relation of cutting force with the cutting energy.

11 November 2016 9,990 4 View

Statistical analysis using RSM is an older practice which has been already well reported and well documented?

What different we can carried out in this?

11 November 2016 1,846 4 View

Regarding some turning experiments?

I have to performed turning experiments on some materials by using some parameters. But the work is specific to the chosen materials and cutting insert. Therefore, the selected parameters and the...

10 October 2016 8,994 8 View

How root mean square (Rq) and maximum peak to valley (Rz) values contributing surface measurement apart from average surface roughness (Ra) ?

Can anyone suggest it?

10 October 2016 7,318 3 View

What is the effect of cutting speed and feed rate on high stresses at tool edge?

Can anyone tell me the relationship between cutting speed and feed rate with stresses

08 August 2016 2,366 4 View

How can we calculate surface roughness during turning?

Based on cutting speed, feed rate, depth of cut and cutting zone temperature.

12 December 2014 6,355 6 View

What is the best parameter design or matrix used to perform a minimum number of experiments, if I have 3 parameters and their 3 levels?

All possible combinations should be used.

12 December 2014 1,682 2 View

What is the effect of recrystallization temperature on microstructre and micro hardness?

Cooling analysis effect on metallurgical behavior?

12 December 2014 5,644 9 View

How can I reduce a chattering in CNC lathe machine during turning of operation?

How we can select the diameter and length of workpiece during turning operation to reduce chattering effects?

11 November 2014 1,880 5 View