PTFE: Polytetrefluoroethylene or teflon and PPL: Polypropiolactone
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
While working on caisson foundation, I applied static vertical load
25 July 2024 9,357 1 View
We have seen in the literature that Ang-1 can be considered as one of the markers. We need information about few more markers.
01 June 2024 9,650 1 View
Notch 3 can be considered as marker for stable blood vessel formation?
01 June 2024 9,788 0 View
Both angiogenesis and arteriogenesis are needed to make stable blood vessel formation. Ang-1 is one of the markers for stable blood vessel formation. Can you please suggest names of few more...
01 June 2024 1,912 1 View
Globally what are the Research opportunities in stabilizing overburden dump slopes in opencast mining?
16 May 2024 5,334 1 View
Conceptual Designing of aircraft provides a major role in designing of aircraft. Let's consider the weight estimation in it. For electric aircrafts its fuel variation is " zero ". Hence W|f is...
18 March 2024 946 3 View
I conducted X-ray diffraction (XRD) investigation on my chitosan sample and need assistance interpreting its diffractogram. If possible, could someone share the chitosan JCPDS card number with me?...
01 March 2024 2,080 4 View
I am able to run PMG and dfe but not mg in Stata. they are showing an error and saying __ec is listed as a predictor. But I had dropped these variables including est variables before running MG....
12 January 2024 5,646 0 View
iti
03 January 2024 2,019 3 View
I'm working on the atmospheric water harvesting, and i synthesized MOF by adding some materials into precursor and changing the conditions. (i followed Hydrothermal method) Actually, if MOF is...
24 July 2024 1,515 0 View
Thanks
22 July 2024 1,143 3 View
Dear Members, We are conducting a research survey on the Printed Circuit Board (PCBs) industry and would greatly appreciate your valuable input. To participate, click the following...
09 July 2024 4,936 1 View
..
08 July 2024 9,140 1 View
Recently, we measured EDX/EDS of LaCrO3 crystals synthesized by hydrothermal method, and found that the characteristic energy for La and Cr are nearly the same for all of the noted energy levels....
02 July 2024 4,587 6 View
My idea was to prepare discal shaped iron-oxide using Al3+ metal-ion mediated solution to regulate the morphology of of my nanoparticles, but most literature uses aluminium acetate and not...
22 June 2024 6,136 2 View
the autoclave has been smelly and seem likely yellow after my synthesis and this changes may effected on other synthesis, so I want to clean PTFE from all sulfur contamination that remain on...
31 May 2024 2,985 0 View
What does the XRD peak at 43 signify in PVDF-HFP? I want to know which phase I have from this XRD report, but I don't understand why the 43 peak is showing.
18 May 2024 5,079 1 View
I prepared h-BN by hydrothermal methods by boron anhydride and urea after hydrothermal I was heated at 800 temps for 12 hours after that my sample stuck to the crucible the third time, and the...
15 May 2024 7,354 0 View
After mixing of ETFE, PET, PTFE and PI powder in planetary ball mill for dispersion, I will do multi-layer the electrostatic powder coating. In this case I would like to know curing tempature and...
08 May 2024 8,166 0 View
