Dear Researchers
FSI simulation in the biological fluid problems
Ansys-Fluent or Abaqus or Adina?
You know that solving the fluid and structure equations as a couple equation is very valuable for FSI simulations. The power of software in the easy meshing of the biological model obtained from MRI is also important.
However, how much is the solving of fluid and solid equations simultaneously worth?
According to the aforementioned concerns, which one of Ansys-Fluent or Abaqus or Adina software is better for biological fluid simulation such as blood circulation analysis in the vessels.
Regards
Dear Seifollah Gholampour ,
In my opinion all of them are good for performing FSI. I prefer Fluent since I worked with it quit a bit and liked it very much. However, another factor that plays an important role is how many physics are contributing to the model. I performed a coupled Structural-Thermal-Electrical multiphysics analysis in conjunction with a Thermal-Fluid-Structure interaction analysis and published it in ASME. It was a very time consuming process with the computation resources I had available at the time. I put the link below for you if you are interested in.
https://asmedigitalcollection.asme.org/PVP/proceedings-abstract/PVP2017/57977/V004T04A010/284562
Thanks,
Dear Seifollah Gholampour,
I think that the best software, for FSI simulation in the field of biological fluid analysis such as blood circulation analysis in the vessels,
is ANSYS Multiphysic.
With best regards
Dear Prof. Ouchetto
Thank you very much for your comment. Do you test the efficiency of Ansys in an FSI project?
- Badges
- Science topic