What is the best method to get doped carbon nanotube?

01 February 2017 1,484 9 View

What is the difference between doping and addition according to the weight percents of additives in EDS analysis?

When we add any material to electrolyte of coating, how can we consider the additive if it is a dopant or only an additive according to the EDS analysis?

31 December 2016 2,957 13 View

Can I use oxalic acid with aniline for electropolymerization?

I would like to apply polyaniline coating in acidic medium, which is the best acid for coating by Potentiostat?

08 September 2016 9,132 2 View

What is the best anion may be improved the polymer coating?

08 September 2016 4,523 2 View

Please, can anyone help me to separate nanowires from washing solution?

I fabricated nanowires and after complete dissolving of template, I need to obtain the dried nanowires. Can anyone help me to achieve this process?

04 May 2016 4,968 10 View

Can anyone help me to interpret the following DSC scan for Al-Ti alloy?

I have DSC for Al-Ti alloy and its composites with MgO and SiC and there are shifting in peaks to upper or lower regions, Please can any one help me to interpret them?

02 March 2016 9,136 4 View

Can I measure some properties of nano wire deposited in AAO template?

02 March 2016 7,886 4 View

Can any one tell me about a journal is publishes quickly?

I have a paper about corrosion and I need to publish quickly.

01 February 2016 4,677 2 View

What are the most important tests to characterize nanowires?

I fabricate nanowire and I would like to characterize it?

01 February 2016 7,342 4 View

What is the best method to analyze the chemical composition of metal matrix composite? XRD analysis didn't give any change compared with base alloy.

Please can any one help me? I fabricated four aluminum matrix composite with SiC and MgO, and I need the best method to find the exact chemical composition after casting. What is the best method...

01 February 2016 977 14 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

Adherance of Polyaniline coating over stainless steel?

Is the electropolymerisation of polyaniline coating over stainless steel (SS) via Cyclic voltammetry technique is really adherant? Else how to improve the adhesion of the coating, whether any...

01 March 2021 8,220 2 View

Can polymer concentrations be calculated based on the number average molecular weight?

Hello, I spin-cast two different polymers onto wafers and measure their height as a function of initial concentration. For polymer A, I have the weight-average molecular weight (Mw) as well as...

28 February 2021 7,882 2 View

Is there a method of determining feed digestibility without the need to re-pellet the feed?

I am aiming to determine the ADC values of a commercial fish feed, but I do not have a steam pelleter or extruder available to me. Ideally, the pellets could be coated with some inert marker....

28 February 2021 7,967 3 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

How to immerse bricks in wax ( for coating ) ?

Do we immerse the bricks horizontally or vertically ? #bricks#waterproofingsurface#civil#engeenering#chemicalengineering#wax#parafinwax

28 February 2021 6,685 2 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View