What is the best method for fabricating heterojunction nanocatalysts?

02 March 2017 1 10K Report

Any suitable methods for fabricating heterojunction based nanocatalysts

Dear Oluwagbenga Fatile

It is very interesting question regarding nanocatalysts. In this regard you can consult a very useful article with the title “Metal–organic framework-derived heterojunctions as nanocatalysts for photocatalytic hydrogen production”.

https://pubs.rsc.org/en/content/articlelanding/2019/qi/c9qi00964g#!divAbstract

Badges
Science topic

More Oluwagbenga Fatile's questions See All

Tip contact resonance determination on Asylum MFP3D?

Hello everyone, So, I am trying some Piezoresponse Force Microscopy measurements using the above-named equipment. For some time now, I have been unable to obtain the contact resonance of the tip...

17 November 2023 8,782 0 View

Is there any way to determine CVD growth temperature?

I am starting a DoE on some CVD and been trying to understand if there's an exact science on selecting the growth temperature of experiments. The question that comes to mind is: is the growth...

20 June 2023 366 2 View

Coat PDMS with PPC?

Does anyone have an idea of how to coat PDMS with PPC without spin coating? The method we are using right now (since we don't have a spin coater) to transfer PPC to PDMS is by tape liftoff (a...

01 February 2022 2,248 3 View

How can I adjust the variance estimate in trial sequential analysis?

Hi everyone, I am presently working on developing a function that computes the z value for group sequential analysis in R software and I am kind of stuck with the result I am having. the function...

31 July 2018 4,124 0 View

How can I study deformation behaviour of High Entopy Alloys

I want to know the best method to study deformation behaviour of High Entropy Alloy

01 July 2017 7,666 3 View

What is the best method of studying deformation behaviour of materials

I want to investigate deformation behaviour of an alloy, which method is the most suitable?

29 June 2017 1,280 14 View

What are the possible interstitial atoms that can be used to improve mechanical properties of High Entropy Alloy

I need examples of interstitial atoms that can be used to improve the strength of High Entropy Alloy

20 June 2017 8,899 4 View

What are the differences between heterojunction and multijunction materials?

I want to know the differences between heterojunction and multijunction

23 March 2017 2,594 3 View

What is the maximum quantity of nano particles reinforcement that can be used for metal matrix nano composites?

I want to know the maximum quantity of nano particles reinforcement that can be used in metal matrix nano composites in order to prevent agglomeration of the particles

29 March 2016 6,013 3 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

Which type of compound does lamda max of 218 indicate in a uv-vis spectrum of a partially purified compound through column and TLC?

A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...

11 August 2024 9,801 2 View

Basis set and input instruction to calculate HOMO and LUMO using Orca for Imidazolium based organic salts?

Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...

09 August 2024 5,444 7 View

Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

How can I measure the thickness of thin film by Uv-Vis?

06 August 2024 7,810 3 View

Why is my ASO degraded quickly on agarose gel?

I have been working on Red blood cell-derived extracellular vesicles as Antisense Oligonucleotide (ASO) carriers. We normally run agarose gel to quantify the loading efficiency. I used naked ASO...

06 August 2024 3,130 2 View

Why is TLC not a form of partition chromatography?

Why is TLC not a form of partition chromatography and paper chromatography not a form of absorption chromatography?

03 August 2024 7,035 3 View

How to convert g/kg Humic acid dose to kg/ha?

I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?

02 August 2024 7,186 6 View

I'm optimizing a tetra-ARMS PCR protocol with amplicon sizes: 165bp, 123bp and 93bp. Why, in the gel, only 165bp is visible while I'm expecting all 3?

It's an end-point PCR protocol. I'm using 1.5% agarose gel with SyBR Safe dye and TBE as a running buffer, visualization on BioRad XR+ system. I was primarily thinking of primer efficiency,...

01 August 2024 4,673 4 View