Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Is IMPACT FACTOR justified in case of Taxonomy?

There is huge pressure of getting good impact factor on scholars now a days. On the other hand Taxonomy is a very dry subject and the concerned papers can only get citation in same group of organism.

26 February 2021 5,851 1 View

Can a Golgi-stained dendritic spines picture processed by Image J be directly used for publication?

24 February 2021 3,348 2 View

What is the difference between PBE and PBEsol functional?

Hello, I am a 3rd year chemistry student and I'm writing my project report on computational chemistry. does anyone know how PBEsol improves upon the PBE functional? Thanks in advance

19 February 2021 7,068 4 View

Can someone help me with this error that I am getting while estimating a VAR model in R?

I am using annual time series data to estimate a VAR model in R. However, when I run the command to find the optimal lag length, I get the following error: Fehler in VARselect(data, lag.max = 10,...

18 February 2021 9,647 3 View

In your experience what is the difference between G.652D and G.655D optical fiber. In field and in lab?

In our current era there is a big confusion about the usage of G.652 and G.655 optical fiber cable. Theoretically G.655 is much better than G.652 but the operator feel that G.652 is giving almost...

11 February 2021 4,006 8 View

Suppose we have a banana seller cart consisting of 4 wheels, weighing about 300 kg. How much torque motors are needed to pull of push it electrically?

I am thinking of electrifying the street food carts while harvesting energy using solar panels on top.

22 February 2021 4,323 3 View

Separated objects vs Non-Manifold Assembly?

I'm trying to do a simulation between the Maxilla and the Mandible I converted the Dicom file from the CT scan to a CAD module and module the articular discs via 3d software. I have two options...

08 February 2021 8,731 2 View

What percentage torque ripple exists in electrical motors used in electric vehicles ?

I am trying to understand the significance/percentage of torque ripples that exist in electrical motors (under operating conditions) that are used in commercial electric vehicles. If someone could...

15 January 2021 5,691 3 View

Can we control the position and vibration, simultaneously, of a flexible link with a tip mass using only the actuator's input?

This is a boundary control problem of a hybrid ODE-PDE system. The system consists of an actuator, a flexible link fixed to the actuator, and a tip mass at the free end of the link. In most...

13 January 2021 8,050 2 View

Why am i getting a negative torque in ansys fluent for a vertical axis wind turbine?

I am trying to simulate a vertical axis wind turbine of darrieus model and i am getting a negative torque. I have followed frame motion, relative to adjacent cell method, and solution method as...

28 December 2020 1,170 3 View

How do I calculate the torque required for linear motion?

23 December 2020 5,064 3 View

How can the Compression Stress on a membrane electrode assembly be calculated from the torque on the bolts of a proton exchange membrane fuel cell?

I'm trying to calculate the compression stress on the fuel cell components so that I can determine the porosity of the diffusion media as in the following paper: R. W. Atkinson, Y. Garsany, B. D....

11 November 2020 2,430 3 View

What is the relationship between the type of material(ex: steel, iron etc.), thrust and torque?

If I am drilling through bars of different material(ex: iron, steel etc.) of the same thickness and under the same conditions of drill operations(feed rate and rpm), how will the torque and thrust...

06 November 2020 4,498 3 View

How to estimate Flux and torque in DTC Five -Phase Machine ?

I have gone through some papers related to DTC for five phase induction motor. And trying to simulate the circuit with their specifications using Matlab/Simulink. But got stuck with feedback...

07 October 2020 1,138 2 View

What methods are used to stop the rate of dissolution of magnesium (its alloy) in physiological solution?

Hello colleagues, It is known that rapid dissolution of orthopedic implants is dangerous. What methods are used to stop the rate of dissolution of magnesium (its alloy) in physiological...

29 September 2020 1,877 5 View