What is POU device for CVD facility?

12 December 2014 0 558 Report

POU device is usual used in semiconductor industy for cleaning the gas before they enter the centralized exhaust system. Is there anybody know detail about it and explain it to me a little bit.

Thanks for your kind answer~

Badges
Science topic

More Yu Haojun's questions See All

How to calculate partial pressure of Fe and Al in the system through their activity and activator?

To some expert who may interested I'm doing pack cementation aluminizing by using FeAl alloy of different composition. In order to predict the coating composition of the coating, I have to know...

03 April 2015 9,168 2 View

What are the health concerns about using NaF in high temperature?

I'm planning to use NaF as avtivitor in pack cementation aluminizing process in high temperature (above 900C). What are the health concerns about using NaF in high temperature?

03 April 2015 3,187 2 View

What's the difference between Ar and H2 atmosphere in aluminizing process like CVD or Pack cementation?

Usually in Pack cementation, Vapor phase or CVD aluminizing process, two kinds of atmospheres are used with donor alloy(e.g. NiAl, FeAl, CrAl) and activator (e.g. NH4Cl): 1. inertia atmosphere...

01 February 2015 8,767 5 View

Can anyone tell me how to reduce the hardness of the platinum layer which is made by eletroplating?

I'm using the Johson Matthey Q-5 salt bath for platinum plating. The bath contains 5g/L Q salt, temperature ia 92 Celsius and pH adjusts to 10.5 by sodium hydroxide. The hardness after...

31 December 2014 1,223 11 View

How do I make sure there are no bubbles in the water lute valve?

I want to use a water lute to balance the pressure in a CVD instrument, the pressure in the chamber is increasing from 1 Pa to more than 1 atm, because this instrument will leak higher than 1 atm,...

11 December 2014 297 4 View

What is the reaction temperature of HCl and FeAl alloy?

Dear all, I'm using pack cemetation method to apply aluminide coating on surface of the alloy with activator NH4Cl, but the pressure of the chamber is not very stable above 800C, so I want to know...

10 November 2014 746 3 View

What is fused salt plating?

What is the difference between fused salt plating and eletroplating, any advantage? Can anyone help me with introducing some books or papers about fused salt plating. I will be very appreciate to...

07 August 2014 5,481 0 View

Why NAl form during aluminizing process by using NH4Cl activitor?

Out pack aluminizng tech and NH4Cl has been use in this process. A layer of AlN form on the surface of the coating at about 1000C and seems to prevent the formation of NiAl.

07 August 2014 3,882 4 View

What's the differences between a phase vapor aluminizing process and pack cementation?

I read from papers that an industralized aluminizing process usually has three forms; chemical vapor deposition, pack cemitation and phase vapor aluminzing processes. The last two are very...

05 June 2014 1,033 3 View

Is there any easy way to get a cross section of the aluminum oxide scale after 10 hours oxidation by using FE-SEM?

I used to bend the coating or scratch the scale off the surface, but the result is not always good, so there must be another way.

02 March 2014 4,782 5 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

Why do a weight decrease for thermal degradation in nitrogen gas condition?

Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...

26 February 2021 1,100 5 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View