if we synthesis a compound, what do we term if no secondary structure present or the presence of secondary structures during the synthesis?
which radical contributes more for dye degradation whether hydroxyl radicals or superoxide radicals? if anyone of those radicals are responsible then what is the method to calculate and determine...
05 June 2018 5,978 7 View
Is there any method to calculate free radicals formed during the dye degradation process in photocatalytic process?
05 June 2018 780 0 View
Is it true that all the biodegradable plastics will dissolve in dichloromethane?
31 December 2017 2,381 3 View
Most of the wastewater treatment systems uses this anionic polymer (0.5 ppm) during the treatment system but noone discloses the name of this polymer. If anybody knows this polymer name, please...
10 November 2017 4,023 3 View
Though there are several methods available to reduce the TDS in industrial wastewater like RO, ultrafilteration, what is the cheapest and economical method of TDS removal?
10 November 2017 1,484 3 View
Please send some research articles related to the adsorption of dyes on formic acid?
05 June 2017 1,785 1 View
For a biotechnologist, what are all the important lifetime memberships available, how to join for free as well as for payment?
02 March 2017 6,096 2 View
It would be helpful if I get an answer for calculating the exact amount of a oxidized compound after the reaction. For example if 5 mg of substance is mixed with an electrolyte. I need to know how...
09 October 2016 6,441 1 View
It would be beneficial if I know what are the inducer or compounds which increase the oxidizing capacity of bacteria? the compound should not affect the growth of bacteria.
05 June 2016 2,955 4 View
Could you suggest a method to give the effect of pressure on microbial growth? Kindly give the procedure or kindly give some reference article to follow?
05 June 2016 1,766 4 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II
05 August 2024 5,291 2 View
How to calculate the molar proportions of the oxides from the XRF analyses?
02 August 2024 2,565 2 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?
30 July 2024 6,261 4 View
I will be doing an XRD on a sample which is powdered in natured and is a hydrogenated compound. I would like to know how we can understand the individual components and components by using the...
28 July 2024 4,548 2 View
Thanks
22 July 2024 1,143 3 View
Suggest the best and shortest route for the chemical synthesis and and green synthesis of magnetite(Fe3O4) The chemical synthesis should contain the least dangerous chemicals along with full...
21 July 2024 2,476 2 View
I'm working with a hydrogel sample and I'd like to perform XRD analysis. Can anyone offer guidance on preparing the hydrogel for the XRD instrument? Specifically, I'm unsure about the best method...
20 July 2024 3,611 4 View