Why output characteristic of OFET does not have saturation region?

I have fabricated an OFET and run the I-V characteristics. I have some problem where my output characteristics shows only linear region and there is no saturation region. What causes the output...

06 July 2018 4,456 6 View

Does the difference in channel thickness in OFET (above 50 nm) will give effect to the shifting of XPS spectra?

As far as I know, the XPS can only measure thickness up to 10 nm. Is there any possibility, I can get shifting in the XPS spectra if I want to study the interface between ITO/organic layer and the...

02 March 2017 4,969 3 View

Why organic semiconductor material has flexible properties compare to inorganic?

What is the criteria that holds by organic s/c which make them flexible? compare to inorganic s/c?

11 December 2016 5,851 4 View

How is the hopping mechanism between metal/organic/metal interfaces?

As far as i know, in an organic semiconductor, the conduction mechanism is by using hopping process. may i know more details, how is the hopping mechanism happens in the metal/organic/metal...

11 December 2016 1,910 0 View

How is the mechanism of vertical organic field effect transistor?

Hi all. I am currently working on vertical organic field effect transistor but i really need a good understanding for each interface between the layer. if anyone of of have a good journals on...

10 November 2016 4,104 3 View

How is the mechanism of vertical organic field effect transistor by using spin coating method?

I am currently working on vertical organic field effect transistor but i really need a good understanding for each interface between the layer. if anyone of of have a good journals on this, could...

10 November 2016 5,375 0 View

How the thickness dependence in vertical organic fet?

10 November 2016 6,047 4 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

How does the injection volume impact LLOQ and ULOQ in regression analysis (LC-MSMS)?

Hello, I have run into an issue that has sparkled a debate at work: is the LLOQ/ULOQ impacted by injection volume under the following circumstances: 1) Same dilution factor of all samples 2)...

23 February 2021 9,159 3 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

How can we add reinforced thermoplastics with granules in injection molding machine?

I need to make an injection molding machine in which short fibers are to be introduced. Short fiber length and material properties are to be determined and also the material strength are to be...

22 February 2021 4,290 1 View