What is difference between super-hardness and super-toughness coating?

Abbas Rahdar @Abbas_Rahdar

01 January 2015 1 5K Report

what is difference between super-hardness and super-toughness coating?

Anil Kumar V

hardness would be resulting in wear resistance. toughness would be reslutinh in an adherent coating.

Badges
Science topic

More Abbas Rahdar's questions See All

Is there the excel files to calculate nonlinear parameters of isotherm?

I look for the excel files to calculate nonlinear parameters of isotherm.

10 November 2018 781 3 View

In Origin software, how can I remove row of numbers in succession in a column?

In Origin software, how can I remove row of numbers in succession in a column? Please see the attached file.

04 May 2017 8,950 0 View

Is there any suggest to dissolve ZnO nanoparticles in water, compeletly?

I want to dissolve ZnO nanoparticles in water, compeletly, but it is not possible. please advice me about this case. please suggest me another solvent along with water. Thank you due to kind...

03 April 2017 4,411 3 View

What is reason for selection Mie theory (and not other theories) to convert intensity distribution to volume and number distribution in DLS?

as you konw, to convert the intensity distribution to volume and number distribution is used from Mie theory (and not other theories) in DLS .What is reason for selection Mie theory (and not...

31 December 2016 9,696 3 View

What is effect of oil (continuous phase ) on the flouresence intensity in water-in-oil microemulsion?

what is effect of oil (continuous phase ) on the flouresence intensity in water-in-oil microemulsion?

09 October 2015 8,865 1 View

With adding water-soluble polymer to water/AOT/oil microemulsion ,What kind of interactions that occur?

with adding water-soluble polymer to water/AOT/oil microemulsion ,What kind of interactions that occur?

08 September 2015 5,277 1 View

Is there relationship between particle size from hydro-dynamical diameter (Stokes-Einstein ) and size from intensity,volume and number by DLS ?

Is there relationship between particle size from hydro-dynamical diameter (Stokes-Einstein ) and size from intensity,volume and number by DLS measurement?

08 September 2015 6,648 0 View

Please introduce me software for the data export from the scanned image?

thanks.

08 September 2015 7,913 2 View

Have we grain or particle or crystallite in thin film?

thanks.

07 August 2015 8,309 1 View

What is difference between "Beta" (β) and the FWHM in the Scherrer formula?

is The "Beta" (β) same the FWHM in the Scherrer formula to calculate the crystallite average size in the profile of Gaussian, Pseudo-Voigt, Pearson VII, Lorentzian?

07 August 2015 340 2 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

What is the main used curing agent for epoxy based coating?

I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose

25 July 2024 438 3 View

How do you get pure primary macrophage cell culture?

I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...

23 July 2024 4,074 2 View

Issues in coating of cathode material on Al foil, why we are not getting proper coating and results when the cathode was coated on Al-foil..?

We are trying to coat some cathode materials on Al-foil ( ex - LiFePO4 , S@CNT, etc). When we coated the Al foil with the cathode (ex - S@CNT) material , the cycling result was annoying. But the...

09 July 2024 5,123 4 View

Why NCM cathode slurry has coating problem?

I tried to make slurry for NCM cathode but there was problem in coating process. The detail of my experiment is following; The ratio between active material(NCM811), conductive additives(Super-P)...

08 July 2024 7,327 4 View

Why can't we get on top of this incubator infection (fungal)?

We have been experiencing repeated what looks very much like fungal contaminations in several incubators (in the same lab). We have tried the following repeated times and yet the coating on all...

02 July 2024 6,375 2 View

How to load Remedesivir drug into mesoporous nanoparticles?

Hello, I want to load Remedesivir (RNA polymerase inhibitor) into mesoporous nanoparticles (MSNs). The issue is drug is temperature and pH sensitive and it degrades quickly. I need advice on its...

01 July 2024 889 3 View