hello everyone,
I need your help. I was meshing a porous media geometry with ICEM, and after meshing, I wanted to transfer the data to #fluent, I encountered this error "WARNING: Mesh has uncovered edges. ANSYS Fluent needs a complete boundary (lines in 2D) or it will give a variety of errors and not read in the mesh! If this was 2D Hexa, perhaps your edges are not associated with perimeter curves".
What should I do, please help me?
P.S. in the attachment I'll upload an image of the geometry.
Did you diagnose the mesh before exporting?
This tool will show you possible problems and try to fix them.
You probably used standard parameters to generate the mesh. Sometimes we need to specify the size of the elements, the tolerance to curvature, the proximity etc. If one of these pores has fallen below these tolerances, the mesh method will ignore these regions and some edges and elements will be opened or deformed, or even without mesh.
Be sure you have chosen the correct element type: triangles instead of tetrahedrons.
Thank you for answering dear Ricardo Vicente de Paula Rezende
for sure i will check that
Adib Amini be welcome, I hope you fix the problems!
- Badges
- Science topic