What are the suitable liquid to immersed in it, the Si or. Sio2 or Na2SiO3 to production si-nanoparticles by mean of laser ablation?
The starting step will be just use the de-ionized water and put your sample in it. It works fine.
However, there are a lot of other options to use some additives.
have fun,
Aslam
Dear professor Muhammad Aslam,
I am looking for more than water another liquid in order to do comparison.
thank for this nice and usful reply.
regard
Raad
how can be checking and test the nanoparticles, have uniform distribution or not in the colloidal species?
11 December 2018 4,539 10 View
Which is the suitable materials to composite with Nanoparticles TiO2?
09 October 2018 7,233 8 View
In laser ablation in liquids, can be use the electrooptical single crystal such as LINbO3 or KTP immerses in water or solution to prepare nanoparticles?
07 August 2018 7,553 0 View
What are the most parameters must be electrically investigated of thin nano particles films?
05 June 2018 2,505 4 View
In preparation of the nanoparticles colloidal, How the polarity of the solvent liquids influences on the optical properties of these particles?
05 June 2018 3,357 3 View
Is there a relationship between the size of nanoparticles with length of absorbance waves
05 June 2018 2,800 5 View
Is the nanotechnology belong to Physics Sciences, Material Engeneering, Chemistry or Materials Sciences?
05 June 2018 1,821 5 View
Which is more efficiency for obtains harmonics generations, large or smaller nanoparticles?
05 June 2018 762 0 View
It is possible to produce nanoparticles colloidal from single crystals. Such as LiNBO3 or KDP as atarget in water using pulsing laser(laser ablation) ?
05 June 2018 4,849 0 View
In laser ablation which is more effective on the properties of the obtained nanoparticles, the number of pulses or the laser influence?
04 May 2018 4,708 3 View
I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...
01 March 2021 6,450 5 View
I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...
28 February 2021 4,890 3 View
25 February 2021 1,987 3 View
20 February 2021 8,202 6 View
I used laser capture microdissection, selected specific bacteria presented in ethanol-fixed slides. And DNA was extracted by Qiamp mini kit. The problem right now is we have pretty low...
09 February 2021 3,908 2 View
Hi everyone We need Fast Green to electroporate plasmid into mice embryos, therefore we simply need it to see some color in the liquid we are electroporating so that electroporation is more...
07 February 2021 1,671 2 View
Dear sir, How to measure cosine, abbe, deadpath errors. I know cosine error, abbe error, deadpath error occurs in laser measurement. But how i can identify the cosine error value. Is any separate...
03 February 2021 4,878 4 View
Dear Fellows, now it is the time to push graphene applications further in terms of easy and low cost production surroundings. Thus I recently dived in the materia and I am facing tons of papers,...
02 February 2021 6,284 2 View
I want to simulate the tribological properties of solids, liquids, and fluids, please suggest good software.
02 February 2021 3,947 3 View
Which of the methods like water jet cutting, diamond cutting, laser cutting, etc. is more suitable to cut the carbon nanotubes reinforced epoxy composites into test sample to ensure the clean...
29 January 2021 1,354 5 View