In laser ablation in liquids, can be use the electrooptical single crystal such as LINbO3 or KTP immerses in water or solution to prepare nanoparticles?
how can be checking and test the nanoparticles, have uniform distribution or not in the colloidal species?
11 December 2018 4,747 10 View
Which is the suitable materials to composite with Nanoparticles TiO2?
09 October 2018 7,433 8 View
What are the most parameters must be electrically investigated of thin nano particles films?
05 June 2018 2,682 4 View
In preparation of the nanoparticles colloidal, How the polarity of the solvent liquids influences on the optical properties of these particles?
05 June 2018 3,531 3 View
Is there a relationship between the size of nanoparticles with length of absorbance waves
05 June 2018 3,029 5 View
Is the nanotechnology belong to Physics Sciences, Material Engeneering, Chemistry or Materials Sciences?
05 June 2018 2,069 5 View
Which is more efficiency for obtains harmonics generations, large or smaller nanoparticles?
05 June 2018 935 0 View
It is possible to produce nanoparticles colloidal from single crystals. Such as LiNBO3 or KDP as atarget in water using pulsing laser(laser ablation) ?
05 June 2018 5,028 0 View
In laser ablation which is more effective on the properties of the obtained nanoparticles, the number of pulses or the laser influence?
04 May 2018 4,943 3 View
In studied of the optical properties of the materials , For what goal we are must calculate or measure index refraction?
04 May 2018 4,406 0 View
i am unable to interpret why its increases in start as shown in figure
11 August 2024 2,179 1 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
After performing symmetric PCR, PCR purification was performed. Afterwards, asymmetric PCR was performed using the PCR purification product as a template, but no ssDNA band was confirmed in the...
08 August 2024 1,668 3 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
I am trying to recover liquid CO2 from a mixture of 0.6 CO2, 0.3 N2, and 0.1 O2. My aim is to recover about 99% liquid CO2 at the bottom of the column and make sure the amount of gaseous CO2...
06 August 2024 4,611 0 View
I have prepared a liquid broth containing Yeast (S. Cerevisiae) that i need to add from it to fermentation media of lignocellulosic hydrolysate. I need to know based on what parameters do we add...
06 August 2024 662 1 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...
05 August 2024 3,290 1 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View