How can be checking and test the nanoparticles, have uniform distribution or not in the colloidal species?

how can be checking and test the nanoparticles, have uniform distribution or not in the colloidal species?

11 December 2018 4,539 10 View

Which is the suitable materials to composite with Nanoparticles TiO2?

Which is the suitable materials to composite with Nanoparticles TiO2?

09 October 2018 7,233 8 View

In laser ablation in liquids, can be use the electrooptical single crystal such as LINbO3 or KTP immerses in water or solution to prepare NP?

In laser ablation in liquids, can be use the electrooptical single crystal such as LINbO3 or KTP immerses in water or solution to prepare nanoparticles?

07 August 2018 7,553 0 View

What are the most parameters must be electrically investigated of thin nano particles films?

What are the most parameters must be electrically investigated of thin nano particles films?

05 June 2018 2,505 4 View

In preparation of the nanoparticles colloidal, How the polarity of the solvent liquids influences on the optical properties of these particles?

In preparation of the nanoparticles colloidal, How the polarity of the solvent liquids influences on the optical properties of these particles?

05 June 2018 3,357 3 View

Is there a relationship between the size of nanoparticles with length of absorbance waves?

Is there a relationship between the size of nanoparticles with length of absorbance waves

05 June 2018 2,800 5 View

Is the nanotechnology belong to Physics Sciences, Material Emgeneering, Chemistry or Materials Sciences?

Is the nanotechnology belong to Physics Sciences, Material Engeneering, Chemistry or Materials Sciences?

05 June 2018 1,821 5 View

Which is more efficiency for obtains harmonics generations, large or smaller nanoparticles?

Which is more efficiency for obtains harmonics generations, large or smaller nanoparticles?

05 June 2018 762 0 View

It is possible to produce nanoparticles colloidal fro single crystals. Such as LiNBO3 or KDP as atarget in water using pulsing laser(laser ablation) ?

It is possible to produce nanoparticles colloidal from single crystals. Such as LiNBO3 or KDP as atarget in water using pulsing laser(laser ablation) ?

05 June 2018 4,849 0 View

In laser ablation which is more effective on the properties of the obtained nanoparticles, the number of pulses or the laser influence?

In laser ablation which is more effective on the properties of the obtained nanoparticles, the number of pulses or the laser influence?

04 May 2018 4,708 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View

How to measure angle between laser travel path and machine axis in Laser Measurement system?

25 February 2021 1,987 3 View

How to get/count refractive index in gasses?

20 February 2021 8,202 6 View

How to increase bacterial concentration of DNA from Laser capture microdissection samples?

I used laser capture microdissection, selected specific bacteria presented in ethanol-fixed slides. And DNA was extracted by Qiamp mini kit. The problem right now is we have pretty low...

09 February 2021 3,908 2 View

How to make Fast Green FCF from powder?

Hi everyone We need Fast Green to electroporate plasmid into mice embryos, therefore we simply need it to see some color in the liquid we are electroporating so that electroporation is more...

07 February 2021 1,671 2 View

How to measure cosine, abbe, deadpath errors?

Dear sir, How to measure cosine, abbe, deadpath errors. I know cosine error, abbe error, deadpath error occurs in laser measurement. But how i can identify the cosine error value. Is any separate...

03 February 2021 4,878 4 View

How to apply graphene oxide on an gold electrode?

Dear Fellows, now it is the time to push graphene applications further in terms of easy and low cost production surroundings. Thus I recently dived in the materia and I am facing tons of papers,...

02 February 2021 6,284 2 View

Which is the best software for the simulation of tribological properties of materials?

I want to simulate the tribological properties of solids, liquids, and fluids, please suggest good software.

02 February 2021 3,947 3 View

Which method is preferable for cutting the nanocomposites?

Which of the methods like water jet cutting, diamond cutting, laser cutting, etc. is more suitable to cut the carbon nanotubes reinforced epoxy composites into test sample to ensure the clean...

29 January 2021 1,354 5 View