What are the reasons of redness of TIB KAT 256 catalyst (Monobutyltin Oxide)?

14 August 2017 0 883 Report

I need an explanation of redness of TIB KAT 256 catalyst (Monobutyltin Oxide)

Badges
Science topic

Similar topics
Mathematics
Statistics

More Botros S Meglaa's questions See All

What the method of preparation of Trimethylolpropane trimethacrylate (TMPTMA) ?

How can I prepare Trimethylolpropane trimethacrylate (TMPTMA)? I know that I have to start with Trimethylol propane (TMP) and methacrylic acid (MAA) in 1:3 but I don't know the right condition to...

11 January 2022 9,085 3 View

How to calculate the degree of branching for a polyester hyperbranched polymer,from 1HNMR data?

I have 1HNMR data. But we do not know how to quantify the degree of branching for the hyperbranched polymers from the area under the curve. Please suggest step by step procedure how to quantify...

25 June 2020 9,885 0 View

How can I get the theoretical Hydroxyl number of reaction of -COOH of polyester with epoxy group of any compound ?

I need to know the theoretical calculation of Hydroxyl number of reaction of -COOH of polyester with epoxy group of any compound

24 July 2018 7,614 3 View

Can anyone send me an ASTM method for determination acidity of MDI for use in the production of polyurethane?

I need an ASTM method for determination acidity of MDI for use in the production of polyurethane to avoid gellation.

08 September 2017 965 5 View

Is it possible to determine hydroxyl value by 859 Trioterm? If yes, how ? If no, what is the alternative for this determination?

I search an accurate method for determiantion hydroxyl value in Hydroxy acrylic resin, saturated polyester resin and alkyd resin.

15 March 2017 2,068 3 View

Is it possible to determine hydroxyl value by 859 Trioterm? If yes, how ? If no, what is the alternative for this determination?

I search an accurate method for determiantion hydroxyl value in Hydroxy acrylic resin, saturated polyester resin and alkyd resin.

02 March 2017 7,113 3 View

Can anyone support me with reference or paper about reactivity ratio of acrylate monomers in hydroxy acrylic, TPA and TSA solvent born?

Reactivity ratio of monomer in polymerization reaction

11 December 2015 9,409 1 View

What are the keys for reading an IR chart for Acrylic polymer Solvent borne, saturated polyester and adhesive flexible packaging?

How can i read IR chart ?

16 November 2015 8,960 5 View

What are the keys for reading an IR chart for Acrylic polymer Solvent borne, saturated polyester and adhesive flexible packaging?

How can i read IR chart ?

10 November 2015 6,246 6 View

Need heterogeneous catalysts calcined before reduction?

Metal-containing heterogeneous catalysts often need to be calcined before reduction, so what are some examples of catalysts that perform better without calcination? What is the reason and how many...

05 August 2024 909 2 View

Why results of ROS flurescence are negative as there was no bacteria within?

Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...

04 August 2024 5,974 3 View

Why aren't most metal oxides insoluble in water?

Why BaO (s) + H2O(l) ---> Ba 2+(aq) + 2 OH - (aq) if Oxygen loves owning all the electrons, why would it bind to hydrogen which competes with Oxygen for electron ownership more so than...

03 August 2024 5,392 1 View

Why chloride turns into chlorine gas in a Downs cell?

I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...

03 August 2024 5,384 0 View

How to calculate the molar proportions of the oxides from the XRF analyses?

02 August 2024 2,565 2 View

What is the solubility of Iron (+3) in Bismuth Oxide?

Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco

29 July 2024 2,163 1 View

Addition of EDTA during the synthesis of copper nanoparticles to prevent it from being oxidized?

I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...

28 July 2024 8,027 3 View

Standard curve of H2O2?

Hi, I need to prepare a standard curve of H2O2 to evaluate the primary products of oxidation. H2O2 I have is 35%. How do I prepare a stock of H2O2 10 microlitere. If s.o has experience, I would be...

26 July 2024 3,460 2 View

Non -oxidizing metal binders?

I'm trying to sinter some Nb parts and I'm trying to find a binder which does not produce oxidative compounds when it decomposes.

25 July 2024 9,823 3 View

I have calcined my catalysts without flowing air from the compressed air cylinder will there be any problem with my reaction if i use that catalysts?

FYI Catalyst is MFI zeolite Si/Al = 140,25.40.11.5,15 I am using this catalyst to study methanol to DME conversion

25 July 2024 2,486 2 View