The FTIR results revealed a increase in the peaks intensity for Ago-coated polyethylene terephthalate (PET) in the 2000–4000
cm-1
3D printing is a process of making three dimensional solid objects from a digital file which object is created by laying down successive layers of material until the object is created
07 August 2019 7,168 1 View
CAB is similar for cellulose diacetate except that it is tougher, more durable and has better dimensional stability
09 October 2018 2,191 0 View
Fourier Transform-Infrared Spectroscopy (FTIR) is an analytical technique used to identify organic (and in some cases inorganic) materials. In this study, nano silver coated on the fabric at...
07 August 2018 6,253 3 View
UV spectroscopy is an important tool in analytical chemistry .When UV radiations are absorbed, this results to the excitation of the electrons from the ground state towards a higher energy state....
07 August 2018 8,286 7 View
Two different salt were solved in the distilled water in room temperature. The final reaction was done by hydrothermal method. So, I want to calculate the weight percentage the production. Can...
07 August 2017 7,985 1 View
I want to measure the contact angle of the nano metal oxide such as, Zn, Ag and Cu.
06 July 2017 434 7 View
Mechanical alloying (MA) is a relatively novel method that has been successfully applied for materials, such as intermetallic compounds and transition metal carbides, which are difficult to...
06 July 2017 1,200 10 View
The Burgers vector associated with a dislocation is a measure of the lattice distortion caused by the presence of the line defect. During mechanical alloying, the powders are subjected to...
02 March 2017 8,263 0 View
Density is defined as mass per unit volume. The density of the majority of the material is available in the literature. Actually I would like to find the density of TiC0.7N0.3 please let me know.
09 October 2015 3,556 2 View
Carbon is a main source of a reaction, eg carbothermal reaction is widely used. This reaction is usually exothermic. Can the presence of amorphous carbon be effective on results in DSC?
01 February 2015 1,244 11 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.
08 August 2024 3,161 0 View
All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.
01 August 2024 589 4 View
Do these peaks in the curve indicate primer dimer or non-specific products?
01 August 2024 7,466 0 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
For example, if low-density polyethylene (LDPE) is equilibrated with PCB contaminated marine and freshwater sediments, can LDPE-lipid partition coefficients be used to obtain equilibrium...
28 July 2024 263 1 View
Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...
25 July 2024 8,108 0 View
Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...
25 July 2024 2,920 11 View
It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...
24 July 2024 8,596 2 View
Hi everyone, Can someone explain for me a method to inject VOC collected with Tedlar bag from pyrolysis process and transfer or inject into GCMS. Thanks
22 July 2024 6,398 1 View