Does anyone know that Burgers vector of as-milled powders varies with increasing the microstain due to the ball–powder collision?

03 March 2017 0 8K Report

The Burgers vector associated with a dislocation is a measure of the lattice distortion caused by the presence of the line defect. During mechanical alloying, the powders are subjected to high-energy collisions, while increase the lattice strain.

Badges
Science topic

More Armin Rajabi's questions See All

Is it possible that nano-ceramics synthesised using 3D printing while lays are still fabricated?

3D printing is a process of making three dimensional solid objects from a digital file which object is created by laying down successive layers of material until the object is created

07 August 2019 7,168 1 View

Does anyone know, how can synthesis Cellulose Acetate Butyrate (CAB)?

CAB is similar for cellulose diacetate except that it is tougher, more durable and has better dimensional stability

09 October 2018 2,191 0 View

Does anyone know, why the intensity of FTIR peaks changed while the functional groups are same?

Fourier Transform-Infrared Spectroscopy (FTIR) is an analytical technique used to identify organic (and in some cases inorganic) materials. In this study, nano silver coated on the fabric at...

07 August 2018 6,253 3 View

What are the effective parameters on the UV absorbance ?

UV spectroscopy is an important tool in analytical chemistry .When UV radiations are absorbed, this results to the excitation of the electrons from the ground state towards a higher energy state....

07 August 2018 8,286 7 View

What are the reasons for pecks changing in FTIR test after coating on the fabric?

The FTIR results revealed a increase in the peaks intensity for Ago-coated polyethylene terephthalate (PET) in the 2000–4000 cm-1

07 August 2018 3,693 0 View

How can I calculate weight percentage of production via hydrothermal method?

Two different salt were solved in the distilled water in room temperature. The final reaction was done by hydrothermal method. So, I want to calculate the weight percentage the production. Can...

07 August 2017 7,985 1 View

Does anyone know how I can prepare powder samples to measure contact angle?

I want to measure the contact angle of the nano metal oxide such as, Zn, Ag and Cu.

06 July 2017 434 7 View

Is the mechanical alloying method repeatable?

Mechanical alloying (MA) is a relatively novel method that has been successfully applied for materials, such as intermetallic compounds and transition metal carbides, which are difficult to...

06 July 2017 1,200 10 View

Does anyone know how we can measure density for a compound with different stoichiometry?

Density is defined as mass per unit volume. The density of the majority of the material is available in the literature. Actually I would like to find the density of TiC0.7N0.3 please let me know.

09 October 2015 3,556 2 View

What is the effect of amorphous carbon on DSC?

Carbon is a main source of a reaction, eg carbothermal reaction is widely used. This reaction is usually exothermic. Can the presence of amorphous carbon be effective on results in DSC?

01 February 2015 1,244 11 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

I have get this error when i calculated the geometrical optimization for prco3, it takes 12 hours until gives this message in the outputfile?

Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...

09 August 2024 7,615 1 View

1. If I can quantize the atom using this hyperbolic spiral and classical physics, could nature do the same?

If we map as a continuous motion an ionising electron (beginning its journey at n=1) in an H atom, a specific hyperbolic spiral appears (see animation). When we solve this spiral formula, we find...

07 August 2024 5,343 2 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

Hello Everyone ! I'm looking for a good journal to publish my manuscript with low publication cost?

I am Looking for a Science Journal with good impact factor and low publication cost to publish a review paper. Your suggestions would be appreciated.

06 August 2024 6,796 3 View

What is the prepared reference material that can be used in inductively coupled plasma optical emission spectrometry (ICP-OES) to measure REE and U ?

What is the prepared reference material that can be used in the ICPE-9820 Shimadzu Japan instrument, which employs inductively coupled plasma optical emission spectrometry (ICP-OES) to measure...

06 August 2024 1,896 1 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

How effective is the Citi Bloc standard basket in enhancing the accuracy and comparability of international construction cost assessments?

Citi BLOC Standard Basket Definitions: A standardized unit representing a fixed basket of construction materials, labor, and equipment costs priced in various cities. Purpose: To create a common...

04 August 2024 8,997 1 View

Any idea about 'International Research Journal of commerce , arts and science? Is it a UGC listed journal?

Any idea about 'International Research Journal of commerce , arts and science? Is it a UGC listed journal? Kindly advice

04 August 2024 7,367 3 View

Is it necessary to covary exogenous constructs in a structural model?

I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...

03 August 2024 6,028 4 View