Multi-crystalline silicon Solar cell fabrication
Dear Aravindan Gurusamy
To reduce solar panels failures people also do the following:
https://www.researchgate.net/publication/289460466_Characterization_of_Multicrystalline_Silicon_Solar_Wafers_Fracture_Strength_and_Influencing_Factors
refer to this article and references therein :
(https://www.intechopen.com/chapters/39149)
"Fabrication of Crystalline Silicon Solar Cell with Emitter Diffusion, SiNx Surface Passivation and Screen Printing of Electrode."
Dear Aravindan Gurusamy ,
The multicrystalline wafers for solar cell production are characterized by:
- Thickness , the thickness must be thick enough to absorb the sun radiation.
This is in the range of 200-250 um.
- The thickness tolerance must be also given
- The grain size must be as large as possible to reduce the grain boundary effects.
It is measured by the average number grains per cm^2.
- The doping in bulk of the grain must be optimum around 10^17/cm^2
- The resistivity of the material using 4 point probes
- The minority carrier lifetime
For the characterization of the silicon wafer for solar cells please refer to the book chapter:
Chapter Solar cells and arrays: Principles, analysis and design
Best wishes
Image processing with automation application
11 August 2019 1,945 3 View
How to insert the compressive and tensile stress - strain curve for concrete in Ansys APDL? Regards, G.Velrajkumar
02 April 2019 1,266 3 View
05 May 2017 4,380 6 View
I am very new to bioinformatics. Here,i am trying to make a phylogeny reconstruction of protein sequences following methods like Maximum likelihood (MEGA 6.0 and GARLI) and Bayesian inference...
22 November 2015 7,758 14 View
Many use enzymes like lyticase to get spheroplasts and subsequently, perform mechanical disruption to disrupt the yeasts cells. The isolation is usually followed by the centrifugation. Apparently,...
10 December 2014 6,971 1 View
I would like to know some probabilities in working with the enzymes in the membranous sources such as liposomes. I am working with a bacterial enzyme which is inactive in its monomeric state. It...
09 June 2014 9,033 3 View
I have a lot of interaction data between two proteins. But, I don't know what is the best way to analyse and represent these data. By interaction data, I know which aminoacid interact to have a...
27 May 2014 4,263 1 View
Use of the software charmm.
26 May 2014 316 3 View
I would like to change an aminoacid in a protein sequence. Can someone suggest me a software? Can I change the sequence directly in the pdb file? If yes, how?
23 May 2014 1,693 7 View
Interaction between MMP & TIMP
23 May 2014 3,264 5 View
Hi all, I am validating a polyclonal antibody raised against human ANT4, through WB and ICC. In most of my controls, the antibody shows very little off-target binding, but when I pre-incubate the...
03 March 2021 5,999 3 View
Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...
03 March 2021 961 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...
02 March 2021 9,945 3 View
im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...
02 March 2021 2,246 2 View
I am thinking about working on solar furnace with heliostats that concentrate sunlight and heat molten salt, but currently no luck with research. Not a lot of papers based on the subject. (check...
01 March 2021 5,023 5 View
Incompletely cross-linked pdms are difficult to remove.
01 March 2021 798 3 View
I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...
28 February 2021 1,638 3 View
28 February 2021 2,534 2 View
I have a doubt on how to select the inductor and capacitor value when I want to implement MPPT controller. This is because we always take a maximum output voltage and current but in this case, we...
28 February 2021 3,637 2 View