After treated PVA Film by microwave plasma take for sem but the film burned so the sugeest is but gold layer for take a picture for surface (sem) so i ask do the gold layer have effect in PVA film !!?
Hello Everyone, I am Trying to run WRF-4.2.1 model and facing an error while running WPS-4.2 - metgrid.exe, error is as below: ./metgrid.exe Processing domain 1 of 3 Processing...
29 January 2024 1,573 0 View
Hi there, I have got a question We calculate the required sample volume for bone marrow karyotyping based on the WBC counting in ISCN. What volume is required in the non-dependent method of WBC count?
27 November 2023 2,264 2 View
Is the difference in variations of specific ERP wavelengths of craniosynostosis patients with normally developed infants would notify a pathology or an expert with clinical experience is...
19 July 2023 8,805 1 View
Is there a solution to the problem of separating mouse bone marrow-derived mesenchymal stem cells using trypsin? Unfortunately, the trypsin/EDTA 0.25% efficiency in separating these cells during...
25 November 2022 8,702 1 View
I want to precipitate strontium in presence of barium while barium is soluble, does anyone have any idea in this regard? Is there any chemical which reacts only with strontium and causes it to...
28 June 2022 4,593 0 View
I want a brief explanation for the new castle Ottawa scale for cohort studies. I cant understand the comparability part of this scale
14 February 2022 6,104 2 View
I prepared zno Nanoparticles how can l measure UV spectra and how l measure SPF factor in vitro and mathematically
27 December 2021 1,403 1 View
I need way to improve antifogging property for PVA. film compare between glass
15 November 2021 2,000 0 View
I need to way to antifogging method for PVA film and glass
14 November 2021 5,669 3 View
I make scaffold of 6% gelatin of freeze drying method.. i would prefer to know the suitable required time and concentration of glutaraldehyde to make cross-linking to gelatin after freeze drying
10 November 2021 8,636 9 View
For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...
06 August 2024 3,175 0 View
In my experiment, I treated RAW macrophages with 100 ng/mL of LPS. After 24 hours, I collected the supernatant and replaced it with fresh media. I then quantified the cytokine levels of TNF and...
01 August 2024 476 2 View
Please note it
29 July 2024 4,920 3 View
https://www.cleanteqwater.com/resources/case-studies/gold-mine-australia/
29 July 2024 5,160 1 View
I have images of film formed on the bottom of a 50mL beaker, and I have been trying to figure out the surface area. I could easily use features on imageJ to do that, but I want to know which area...
23 July 2024 4,461 1 View
What is a diamond open access journal and difference between green and gold access?
12 July 2024 9,717 3 View
I am trying to measure the plasmon resonance angle of gold film and pure water using the Kretschmann configuration and a 633nm laser. Without flowing water over the gold, I can detect a clear...
10 July 2024 4,719 3 View
In order to make a polyaniline film, I used the electrodeposition method and set all the conditions, but I noticed that the polymerization process is happening, but it doesn't stick to the...
09 July 2024 2,708 2 View
Dear researchers, In a systematic review (not a meta-analysis) compiling studies on various diagnostic systems against a specific pathogen. The most relevant parameters evaluated are the type of...
03 July 2024 9,069 3 View
Appreciate your advice as I am asking about Airborne Magnetic Survey for mineral exploration (Gold and Associated Elements). What's the maximum depth for detecting subsurface extension and what...
02 July 2024 6,179 5 View