15 November 2021 3 6K Report

I need to way to antifogging method for PVA film and glass

More Hoda Elsaeed's questions See All
Error while running WPS-4.2 - metgrid.exe?

Hello Everyone, I am Trying to run WRF-4.2.1 model and facing an error while running WPS-4.2 - metgrid.exe, error is as below: ./metgrid.exe Processing domain 1 of 3 Processing...

29 January 2024 1,573 0 View

Does anyone know what volume of bone marrow is required in a method independent of cell counting?

Hi there, I have got a question We calculate the required sample volume for bone marrow karyotyping based on the WBC counting in ISCN. What volume is required in the non-dependent method of WBC count?

27 November 2023 2,264 2 View

How can we analyze ERP signals in craniosynostosis infants?

Is the difference in variations of specific ERP wavelengths of craniosynostosis patients with normally developed infants would notify a pathology or an expert with clinical experience is...

19 July 2023 8,805 1 View

How to overcome the difficulty in passaging mouse bone marrow-derived mesenchymal stem cells?

Is there a solution to the problem of separating mouse bone marrow-derived mesenchymal stem cells using trypsin? Unfortunately, the trypsin/EDTA 0.25% efficiency in separating these cells during...

25 November 2022 8,701 1 View

How to precipitate strontium in presence of barium?

I want to precipitate strontium in presence of barium while barium is soluble, does anyone have any idea in this regard? Is there any chemical which reacts only with strontium and causes it to...

28 June 2022 4,593 0 View

What is the exact definition for comparability part of the NEWCASTLE OTTAWA scale for cohort studies?

I want a brief explanation for the new castle Ottawa scale for cohort studies. I cant understand the comparability part of this scale

14 February 2022 6,104 2 View

How can l measure UV and SPF for sunscreen?

I prepared zno Nanoparticles how can l measure UV spectra and how l measure SPF factor in vitro and mathematically

27 December 2021 1,402 1 View

How to prove the property of antifog for aPVA film?

I need way to improve antifogging property for PVA. film compare between glass

15 November 2021 2,000 0 View

What are the effect gold layer in PVA Film to make sem ?

After treated PVA Film by microwave plasma take for sem but the film burned so the sugeest is but gold layer for take a picture for surface (sem) so i ask do the gold layer have effect in PVA...

12 November 2021 536 0 View

What is the required time and concentration of glutaraldehyde to make cross-linking to gelatin after freeze drying method??

I make scaffold of 6% gelatin of freeze drying method.. i would prefer to know the suitable required time and concentration of glutaraldehyde to make cross-linking to gelatin after freeze drying

10 November 2021 8,636 9 View

Similar questions and discussions
Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,175 0 View

How can I better use imageJ to get good result on calculating surface area of a film accurately?

I have images of film formed on the bottom of a 50mL beaker, and I have been trying to figure out the surface area. I could easily use features on imageJ to do that, but I want to know which area...

23 July 2024 4,461 1 View

Does the potentiostat have to be in a fume hood when polymerising the PANI?

I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...

10 July 2024 2,936 3 View

Why can't I detect the plasmon resonance angle with water?

I am trying to measure the plasmon resonance angle of gold film and pure water using the Kretschmann configuration and a 633nm laser. Without flowing water over the gold, I can detect a clear...

10 July 2024 4,719 3 View

I want to ask why the poly aniline film does not stick to the ITO type substrate knowing that I used the electrodeposition method?

In order to make a polyaniline film, I used the electrodeposition method and set all the conditions, but I noticed that the polymerization process is happening, but it doesn't stick to the...

09 July 2024 2,708 2 View

Where to source glass rings compatible with cell culture?

Hi all, I am looking glass cilinders that have an open flat bottom and top. Preferably with the inner diameter in the range of 2 cm. It's similar to the ones found on multi-electrode arrays for...

06 July 2024 5,846 1 View

What is alternative for PMMA?

If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...

03 July 2024 2,371 1 View

What is polymer/chemicals can increase the swelling index of a polymeric film?

Polymeric film such as latex rubber substrate or polymer

01 July 2024 8,343 4 View

How can we reduce the porosity of tungsten oxide (WO3) thin films during DC sputtering deposition (target: W, power: 100 W, 75 W, and 50 W)?

We are fabricating a tandem structure where a ~50 nm thick WO3 film is deposited between two metal films using DC sputtering. We use a mixture of Ar and O2 gases at different flow rates while...

01 July 2024 2,686 2 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close