What are the challenges facing PEM fuel cell Technology that could be overcome by Fluent, CFX or Comsol?

02 February 2014 1 9K Report

What are the new trends of using CFD to solve the Mechanical issues within PEM fuel cell Technology?

Hello Aimen,

it seems to me that you are looking for some global answers (see my reply to your second question). To provide you some assistance you should be more precise.

Here I can answer that CFD helps in understanding for example water management within in PEM fuel cells. Water transport is one key issue.

Peter

Badges
Science topic

More Aimen Zeiny's questions See All

Why does disolving salt in water reduce its thermal capacity and conductivity?

How can the ions of the dissolved salt in water affect the thermal capacity and conductivity? What is the mechanism behind that? Many thanks in advance.

06 July 2017 2,523 4 View

Does every nanofluid, solution, ionic liquid, or liquid has its unique radiation absorption?

It is well known that the peak absorption of gold nanofluids is at ~520nm wavelength (depends on the nanoparticle's size). Can another nanofluid (or other liquid, ionic liquid or a solution) have...

31 December 2016 6,330 4 View

What is the scientific interpretation of light reflection?

Why does light reflect from mirror-like surfaces? And is there a reflection of light when the light passes through a nanofluids? and Why?

10 November 2015 2,510 3 View

Is it possible that adding nanoparticles to a liquid decreases the viscosity?

I am wondering if adding nanoparticles to liquids can reduce the viscosity? And is there a certain type of nanoparticles having this ability? Thank you in advance.

07 August 2015 7,731 12 View

Is there a mathematical model to convert the electromagnetic field obtained by solving Maxwell's equations into heat (or temperature distribution)?

Hi, I am trying to simulate the heat generated by gold nanoparticles excited by light. I have found some researchers solve this problem by solving Maxwell's equation and the results are the...

03 April 2015 3,583 8 View

Can one suggest a way or method to measure (or calculate) the amount of ammonia gas generated in the absorption refrigeration system?

Thank you very much in advance. I am trying to design an experiment to measure the amount of NH3 (gas) which is generated in the generator from the binary-fluid (NH3-water) in the refrigeration...

01 February 2015 709 6 View

What is the difference between the 'modulus of elasticity in tension' and 'Young's modulus'?

Recently, I have read a book and I have found these two terms: modulus of elasticity in tension and Young's modulus. For example, for a gasket material, the modulus of elasticity in tension is 2...

09 October 2014 5,088 12 View

Thanks a lot in advance. Can one suggest a topic for a PhD study?

I am a Mechanical Engineer and I am very interested in CFD utilization in solving problems and optimizing systems. I am interested in clean power generation. Also, I am very interested in...

02 March 2014 2,986 1 View

What are the Mechanical issues within PEM fuel cells?

Thanks in advance.

01 February 2014 1,787 4 View

Could you recommend some articles on Urban Transportation System optimization and Innovation?

13 August 2024 2,595 3 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View