I want new articles about 1,2,3-triazole derivatives as corrosion inhibitors for steel
Article 1,2,3-Triazole derivatives as corrosion inhibitors for mild ...
http://corrosionjournal.org/doi/10.5006/1.3277657
Article Study of a Triazole Derivative as Corrosion Inhibitor for Mi...
https://www.hindawi.com/journals/ijelc/2019/6759478/
Hi Faeza
Take a look at the link below:
Article Occurrence, toxicity and transformation of six typical benzo...
There are different types of articles about using Triazole derivatives as a typical corrosion inhibitor.
Regards
1- https://www.jmaterenvironsci.com/Document/vol9/vol9_N2/49-JMES-3469-Rouifi.pdf
2- https://www.sciencedirect.com/science/article/abs/pii/S0022286018310998
3- https://www.mdpi.com/1420-3049/18/12/15064/htm
Thanks for all
Article Synthesis of 1,2,3-Triazole Derivatives and Its Evaluation a...
Article A Review on 1,2,4-Triazole Derivatives as Corrosion Inhibitors
I would suggest you to read this article. Take a look at the link below:
https://www.degruyter.com/view/j/corrrev.2018.36.issue-6/corrrev-2018-0006/corrrev-2018-0006.xml
General properties and comparison of the corrosion inhibition efficiencies of the triazole derivatives for mild steel
Muhammad Faisal📷 Aamer Saeed / Danish Shahzad ...
Published Online: 2018-10-06 | DOI: https://doi.org/10.1515/corrrev-2018-0006
How can Azo compounds be synthesis without partially decomposing?
31 December 2018 9,859 5 View
I have a new aldehyde I want to react it with amino acids, what are the necessary reaction conditions ?
11 December 2018 810 8 View
I looking for ferro calcium production process
03 March 2021 1,755 4 View
Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...
02 March 2021 4,119 3 View
It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...
02 March 2021 728 2 View
My study consists simple corrosion inhibitors in salty brine. Right now I just fit my circuit with randles with CPE. Just wondering how the slop can given more info of the experiment. Or any...
01 March 2021 6,474 3 View
As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...
01 March 2021 8,840 1 View
I have a structure that employs d-ring swiveling tie-downs that corrode during use and become "frozen". I have sample swivel assemblies that I wish to corrode to see if I can free them using one...
01 March 2021 3,739 3 View
I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...
27 February 2021 1,829 3 View
Hello, I am running a sandwich-type ELISA where I am trying to inhibit a protein-protein interaction using small molecules. For each experiment, I determine my Z' (Z-prime) to determine the...
23 February 2021 7,429 1 View
My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...
22 February 2021 2,965 4 View
Dear all, If steel jacketing is used to retrofit a reinforced-concrete (RC) column, can we use it to improve flexural strength? I understand that we leave gaps between the ends of the jacket and...
22 February 2021 1,906 5 View