Titanium welding of grade 6 ( TI-5Al-2.5 Sn)?

04 April 2017 1 10K Report

In titanium welding of grade 6 ( TI-5Al-2.5 Sn), which are the intermetallics and precipitations that can be formed? Is there a way to avoid their formation?

Timur Kandemir

This might help:

https://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwim1eymrbHTAhUIK1AKHZmwAIcQFggnMAA&url=http%3A%2F%2Fextras.springer.com%2F2006%2F978-3-540-25014-2%2F00400011a4%2Fpapers%2F00400011a4%2F00400011A40023.pdf&usg=AFQjCNEMoPzt2_hDSFAvZTzmOsB00dvUQw&cad=rja

Badges
Science topic

More M. E. Kazasidis's questions See All

Modulus of toughness, impact toughness, fracture toughness?

I want to compare two steel grades regarding the toughness (i.e. their ability to absorb energy until failure). I need to ask two questions on that issue. 1. Considering that impact and fracture...

02 March 2018 7,994 4 View

Solidification mode in fusion area?

Among the various solidification modes (plannar, cellular, columnar dendritic, equiaxed dendritic) which are possibly to become observed in the fusion area of a weld? It concerns technique with...

11 December 2017 8,824 2 View

Agglomeration of Inclusions of corrosion products?

I' m working on the toughness estimation of the weld metal in the case of a FCAW welded HSLA steel. On the fracture surfaces of Charpy specimens (notch is on the weld metal), the following...

09 October 2017 4,813 3 View

Impact Toughness of HSLA steel welds

I am currently working on the determination of the impact toughness of HSLA steel welds. The used welding technique is the FCAW. Would someone suggest relevant literature which can explain why the...

05 June 2017 6,340 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

How to simultaneously perform multiple biochemical assays?

I am a research scholar working on heavy metal stress on plants. I will be doing biochemical characterisation( protein, carbohydrate, proline, antioxidant enzymes and many more assays) at interval...

01 March 2021 6,999 3 View

Which reagent is best among 'Dimethylglyoxime" and "Dithiothreitol" for spectroscopic determination of Nickel ?

What I think is Dithiothreitol. As it is water-soluble and does not form a precipitate. But, the thing is it contains sulphur which is quite hazardous to aquatic animals.

01 March 2021 8,374 4 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View