Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to calculate the annealing temperature of a primer pair?

I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...

01 March 2021 360 7 View

Which fluorescent dye to use for measuring total ROS production?

Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?

01 March 2021 9,447 3 View

Does any one can help me choose a reasonable basis set for intermediate metal ions interactions with guanine (i.e Fe2+, Mn2+, Cu2+ and exc.)?

Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...

01 March 2021 6,187 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

Tooth extraction and subsequent dental implant placement in Sprague-Dawley rats induce differential changes in anterior digastric myofibre size and ?

01 March 2021 7,254 3 View

Interpretation of Goodman - Kruskal Gamma squared?

Dear colleages, Eta squared is dominantly used in reflecting the explaining power the same manner as a squared partial correlation coefficient (R2p ) from multiple linear regression: as the...

22 February 2021 7,801 3 View

What effect size should i use for a meta-analysis when study data violate normality assumptions?

I'm looking for advice regarding what effect size to use for meta-analysis. Our question is whether the number of individuals in a group affects the per-capita productivity of that group. Does...

10 February 2021 5,510 8 View

No title

29 January 2021 2,623 1 View

What can be the Research Design if I am looking for Correlation Coefficient and Regression Coefficient?

In our research our title includes the impact of academic anxiety on academic performance. This one is a quantitative research. Our data is numeric. Can someone suggest what can be the research...

21 January 2021 1,650 3 View

Which statistics to use for this?

I am currently working on a project which replaces a COD analyses with a TOC analyses using the COD/TOC-ratio factor and/or linear regression of COD vs TOC. Which form(s) of statistic tests can I...

16 January 2021 4,590 3 View

Can two seperate variables, one a strong negative correlation and the other moderate negative result into a strong positive in a multiple regression?

I selected two individual variables with very decent negative correlation coefficient to fit in the multiple regression analysis. I ran it, whilst the regression coefficients remained negative,...

03 January 2021 3,432 10 View

How do I plot the correlation coefficients (r) on a map based on a list of variables?

I am working to improve a manuscript and I have been advised to provide a map showing where the correlation is significant. Any information or links to learn about this would be quite helpful....

26 December 2020 1,162 5 View

Fisher's transformation in SPSS?

Hello, I want to compare correlations coefficients between two groups, females and males. I have a lot of variables. Is there an easy way to use the Fisher's r to z transformation in SPSS?

23 December 2020 4,983 3 View

Calculating Intercoder Reliability for 3 coders with 7 categories across 6 texts?

How would you calculate inter-coder reliability (Kappa coefficient?) for the following scenario: 6 texts coded across 7 categories (codes) by 3 coders?

23 December 2020 2,324 3 View

Who has worked with Lasso regression in R software?

I want to instruct a response prediction model while my sample size is small (18 patients) and about 100 features were extracted for each patient, so I need to use Lasso regression in R software....

15 December 2020 6,234 4 View