Significance of free-water method in Aspen Plus?

More Muhammad Haris Hamayun's questions See All

How combine yolo with Faster R-CNN?

I want a model that is balanced with accuracy or speed, faster rcnn has high accuracy while yolo have fast speed. i am thinking to combine them to get a hybrid model to achieve both speed and accuracy

02 August 2024 3,104 0 View

What should be the sample container for the hydrothermal reaction in a microwave reactor at 180 °C for 10 min at the heating rate of 5 °C per minute?

Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container

30 July 2024 7,326 1 View

Addition of EDTA during the synthesis of copper nanoparticles to prevent it from being oxidized?

I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...

28 July 2024 8,027 3 View

Can I please ask why my samples from anaerobic bioreactor giving me different size PCR product even after multiple runs?

Hi everyone, I have extracted DNA from a biogas bioreactor using Qiagen kit and prep cDNA library then used this library as template to optimize primers for qPCR (taken from papers). Some of the...

23 July 2024 1,329 5 View

Swerling Characteristic functions?

Hello!!! I want to implement the Swerling characteristics functions (CF) directly in MATLAB without using its Fourier integral pairs...the Swerling CFs are actually Laplace Transform of the signal...

23 July 2024 4,925 1 View

Radar Detection Probabilities?

Currently I need to calculate detection probabilities (PD) from RCS data. Beta distribution parameters for this RCS data are calculated and will be used in Swerling0 Equation. The idea is based on...

22 July 2024 2,851 0 View

Why methanol and sulphuric acid used in the analysis of polyhydroxyalkanoates (PHA) by GC-MS?

Why methanol and sulphuric acid, used in the analysis of polyhydroxyalkanoates (PHA) methyl esters by GC-MS? Additionally, why do we typically use non-polar solvents in GC-MS?

22 July 2024 1,210 2 View

Radar Detection Probabilities using beta distributed Scattering Cross section?

Currently I need to calculate detection probabilities (PD) from radar cross section (RCS) data. Beta distribution parameters for this RCS data are calculated and will be used in Swerling0...

22 July 2024 868 0 View

I want to buy Hydrothermal Synthesis Autoclave from any European company. Can anyone suggest any company inside Europe?

Thanks

22 July 2024 1,143 3 View

Optimal condition for depositing FTO target 95:5% using sputter technique?

Hello I want to know about the sputtering condition of depositing FTO from target 95:5%. I tried with RF sputter in pressure 2.5Pa and 100 sccm Ar at room temperature but it showing no...

21 July 2024 1,680 2 View

Aspen Plus Simulation?

Greetings When one is to perform Simulation or modelling of Pyrolysis of Biomass Waste materials using Aspen Plus software, and one has both the macromolecules breakdown (Cellulose, Lignin and...

06 August 2024 5,023 1 View

How can I add own Henry coefficients in Aspen Plus?

Hi, i would like to simulate an absorption process in Aspen Plus. I want to use the NRTL model und would like to add some individual Henry coefficients. Is that possible and how?

05 August 2024 2,333 2 View

I heve some problems in simulating 1,3 Butadiene extraction with NMP(by BASF) CAN ANYONE help me?

I am currently simulating the extraction of 1,3-butadiene using NMP solvent (BASF) in Aspen Plus. I am encountering difficulties when entering values for the binary parameters. I have referred to...

01 July 2024 7,069 0 View

How to get the standard free energy of formation (DGFORM) for AIR in Aspen Plus ?

01 July 2024 8,134 3 View

Aspen Adsorption linking to MATLab ??

Hi, I am looking to link MATLAB to Aspen Adsorption. I know that for Aspen Plus, it is possible to use actxserver(). Does anyone know if the same method can be used for Aspen Adsorption as well?...

20 June 2024 8,338 2 View

Given, ER = 0.2, WHAT WILL BE THE AIR FLOW RATE IN kg/hr?

I have a biomass with given ultimate and proximate analysis data. I am using Aspen plus for the simulation of gasification of biomass. In experimental data the gasifying agent air flow rate is...

18 June 2024 2,743 1 View

How can I create a CO2 partial pressure to CO2 loading diagram on Aspen Plus?

Using experimental data, I am currently trying to verify the thermodynamic model I chose for my CO2 capture flowsheet. I am currently trying to compare how the model fits the data of Jou et al (...

22 May 2024 5,932 5 View

What are the latest software and technologies for the calculation of the energy status of construction materials?

SPSS and energy Plus are using for the calculation of the energy calculation . if there is any others software and technology that may be very better for my research. why Nepalese researcher are...

30 April 2024 8,205 2 View

What method name in ASPEN PLUS should be used for lactic acid production?

or is there any way to calculate the inlet flow rate based from a desired output using ASPEN PLUS? Are there any studies that you can suggest that can answer our question? This is for our Design...

18 April 2024 410 3 View

Could anyone please indicate papers with EnergyPlus validated with field measurements in Phoenix, AZ?

So far, I have only found Dissertations.

11 April 2024 2,188 1 View

Markus H Bauer

Free wate only used with oil where you have no solubility. Dont use for organic Chemicals and water.

Steam nbs is the new version of steam ta. Dont worry unlike you plan to build a complete power plant.

Muhammad Haris Hamayun

Thanks dear Markus for your kind reply and comprehensive description.