Reverse Osmosis mass transfer COMSOL model for desalination process (salt rejection)?

More Hock Chee Lu's questions See All

Why are there two reduction peaks in my cyclic voltammogram?

When I measured the cyclic voltammogram of palladium in the pbs solution, two reduction peaks appeared. This did not match the literature I saw. Why? And how can I find the possible reaction...

20 February 2021 2,486 3 View

How can I get rid of the bubbles in the SBS membrane?

I used methylcyclohexane/ ethylcyclohexane / n-butyl acetate mixed solvent to dissolve thermoplastic SBS & terpene resin. The mixture is then poured onto a glass substrate. After solvent...

24 January 2021 8,306 3 View

Which configuration of seawater treatment is better?

Hi world, I have a curious question about desalination of seawater. Since seawater contains a alarming amount of suspended solids and salt (35 ppt). Which of these configuration is more viable...

03 January 2021 2,383 2 View

Why oxidation with peracetic acid engender staining of oxytalan fibers with clastic tissue stains?

Just a quick question above, this oxidation method is mentioned by literature, but no one talked about the principle. Can anyone figure out how the oxidation works on any specific group?

20 December 2020 5,878 1 View

Is this yeast contamination and how do I get rid of it?

I received this gastric tumor biopsis and processed using standard protocol to establish gastric cancer organoids. Contamination looks like this. I have never seen this before and the culture...

08 November 2020 8,541 4 View

I am trying to design a desalination reverse osmosis membrane system. May I know is there a way to obtain the calculation steps for the design?

Designing a desalination reverse osmosis membrane system. Could someone recommend me some designing publications or a step by step calculation guide for the design? Much appreciate. Thanks :)

06 November 2020 7,565 3 View

Are there any structural differences between sucrosic dolomite and saddle dolomite?

Sucrosic and saddle dolomite are known to be different petrographically. However, are they different in structure, e.g., under XRD or TEM?

20 September 2020 2,495 2 View

Is there a function coded by matlab to reproject the geographic raster data?

Is there a function coded by matlab to reproject the geographic raster data?especially for the case converting the Ease-Grid 2.0 to the geographic coordinate.

17 June 2020 7,875 2 View

Can someone recommend some books about analyzing EEG data based on python?

I am learning to use the tool MNE. It has a great web-based tutorial, but the tutorial is not so systematic and detailed like a book. I have seen some people recommending the book "Analyzing...

26 March 2020 5,098 2 View

Why does my HPLC filter always generate air bubbles?

I have an old HPLC machine. Every time when I put my filter into 50%:50% water and acetonitrile mixture, my filter always generate bubbles. However, once I change the solvent to 100% acetonitrile,...

08 March 2020 5,587 4 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

Ali A. Hasan

In fact, my experience in reverse osmosis is not that great, and I can benefit you more in the osmotic membrane. In this mechanism, and through my experience, it is good at removing salts, especially traditional ones.

Md. Kabir Ahamed

Hi Hock Chee Lu,

I think this article may help you a lot. Here, Molecular transport through a single nanopore in lipid membranes of vesicle has here been studied by COMSOL simulation

Article Study of molecular transport through a single nanopore in th...

Hock Chee Lu

Thank you for the help. I will look through some of the information you guys shared. :)