Optical properties of chalogenides ...
Recent applications of optoelectronics
Dear Dr. Tejaswini M L,
Research articles on Recent Progress/advances in chalcogenides.
Article Are Chalcogenide Perovskites an Emerging Class of Semiconduc...
Article Recent Advances in Chalcogenide Glasses
Article Recent developments on the optical properties of thin films ...
Article Recent Advances in the Synthesis and Characterization of Cha...
Article Optoelectronic devices, plasmonics, and photonics with topol...
I hope I have answered your question.
With Best Wishes,
Samir G. Pandya
Thank you Sir
I am working on microalgae cultivation using waste water. The initial concentration of nutrients were less but the microalgae has achieved biomass growth of 2 g/L. The final concentration of...
08 August 2024 4,812 2 View
FYI Catalyst is MFI zeolite Si/Al = 140,25.40.11.5,15 I am using this catalyst to study methanol to DME conversion
25 July 2024 2,486 2 View
I intend to get an economical and accurate LAB TEST to measure arsenic concentration in blood sample.
23 July 2024 3,654 2 View
In your opinion, I would like to know if a qualitative study with a structured interview can be conducted in writing. In other words, we sent out open questions and asked the interviewees to...
11 July 2024 4,163 4 View
What is Differential-Fed in microstrip patch antenna ? How it is design in CST studio? What is simulation process and procedure to do Differential-Fed in CST studio ?
08 July 2024 7,464 1 View
How to know the TM/TE modes in antenna design in CST studio? Example: TM01 ,TM02 ,TM10, TM12, TM30 like this... how can identify the antenna is operate the above said mode? can any one explain...
08 July 2024 6,609 2 View
what is co-polarization and cross polarization? How can plot it from CST studio? what are steps and process for find out co-polarization and cross polarization from CST studio?
08 July 2024 7,869 1 View
1. I was shocked to discover yesterday that my research citations on Google Scholar had dropped to 2383 from 2419 a week ago, and they are now up to 2391. 2. My citations three months ago were...
28 June 2024 2,846 2 View
In an antibiotic degradation experiment using metals carbon composites to activate PMS, the results doesn't fit pseudo first or second order kinetics however the degradation efficiency is very...
26 June 2024 6,941 3 View
Hi All . Recently, I conducted Hall measurement experiments at high temperatures on highly p-doped diamond with a doping concentration of 2.5×10^20 cm−3 During these experiments, I observed two...
23 June 2024 4,763 0 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View
I am currently using CASTEP version 2020. When I want to run optical properties calculations with spin-orbit coupling(SOC), I encounter the following error in a pop-up window before the job gets...
02 August 2024 2,890 0 View
I am using gelatin to model mechanical properties of brain tissues in-vitro. Do you have any suggested concentration ? Thank you so much.
19 July 2024 3,095 0 View
I am carrying out an experiment on Trichoderma and need to measure OD of the fungal growth after 7 days. Unlike bacteria, fungus clump together making It difficult to get OD for the fungal growth....
11 July 2024 6,251 1 View
..
10 July 2024 3,444 4 View
Hi, I need to measure the real-time (or temporal intervals) thickness variation of a transparent material from dry to wet/humid conditions, however, I cannot use the following techniques: -...
08 July 2024 4,799 4 View
The diagram suggests that there is a contradiction within the second law of thermodynamics and Carnot's efficiency theory. According to the second law, Carnot efficiency is independent of the...
08 July 2024 7,478 4 View
For the PDMS material, it's linear thermal expansion coefficient is about 3.2*10-4/℃. The polyimide has a smaller linear thermal expansion coefficient like 2*10-5/℃, but it cannot be stretch. It...
04 July 2024 4,525 1 View
I'm having a bubbling error while splicing 100/350 um optical fiber (core/cladding) on the Fujikura FSM100P+. I have tried some ways such as changing Prefuse power and Prefuse time but to no...
03 July 2024 7,463 6 View
In nanocrystalline metals, the size of their crystalline grains affects how strong, ductile, and hard they are. Smaller grains often mean stronger metals but can reduce ductility. Controlling...
28 June 2024 6,925 0 View