Recently i observed some incomplete form of growth hillocks on the crystal surface. Need valuable reasons. Find the attachment of the observed figure.
Dear Karunanithia
Different parameters can play important role to crystal structure, such as temperature, Solvent, Time and so.
There fore I think from these parameter all played this role to your work.
If possible please send me one image from your crystal.
Sincerely
Dr. Aslani
Did you mean the crystal image
Dear
I understand You. image from your crystal and its hillocks?
Are you understand me?
Dear Sir,
The attached images (in question) is observed from my solution grown organic single crystal. I plan to etch the crystal surface by using toluene, we observed this kind of growth hillioks. The time duration is 60 secs.
What is the role of hydrogen bonds in organic acentric material to increase their NLO (SHG) property?
31 December 2014 1,152 2 View
For example for my transistor ON ratio 100 and OFF at 10 for 50 V VSD. Could anyone explain and clear by using the formula for this ON OFF value
10 November 2014 621 4 View
How can I measure the laser damage threshold of the crystal if the damaged area is an irregular shape?
10 November 2014 3,412 6 View
That high specific heat material are suitable for high power laser application? But best of my knowledge the material with low laser damage threshold is suitable for laser application and...
08 September 2014 9,492 2 View
Alcohol solvent is good to solve the said material. Is there any specific reason to use this toluene solvent?
05 June 2014 7,795 3 View
Structure overlay.
04 May 2014 3,877 5 View
For a flexible field effect transistor coated by thermal evaporation
04 May 2014 3,352 4 View
UV-Visible cut off wavelength
04 May 2014 5,053 3 View
To achieve optical quality single crystal.
03 April 2014 1,771 5 View
As above.
03 April 2014 8,883 2 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
After performing symmetric PCR, PCR purification was performed. Afterwards, asymmetric PCR was performed using the PCR purification product as a template, but no ssDNA band was confirmed in the...
08 August 2024 1,668 3 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Are there any suggestions or insights you can provide to help address this problem
06 August 2024 1,443 2 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?
30 July 2024 6,261 4 View