We have the purified protein with the concentration of 80 microgram/ml. We had synthesize protein based nano particles with 80 microgram/ml of protein. But, after NPs formation the concentration of protein was low. What's the reason?
How are you measuring protein concentration? What kind of nanoparticles are you producing?
Thank you for your response.
Protein concentration were determined by Brad ford assay. Then protein based Zinc oxide nanoparticles were produced.
Could you please describe the whole procedure.
How to calculate H2/CO ratio in dry reforming? This question is for my friend. The ratio should come around 1.0. But the ratio coming 35, 40, 48. CO peak is higher and H2 peak is smaller. What is...
31 January 2021 7,788 3 View
For dissolving haloalkanes which is best solvent - polar or nonpolar? How much quantity of solvent is required if the solublity is unknown.
12 October 2020 3,447 4 View
The color of dichloropropane changed from colorless to brown color during distillation. The actual color of dichloropropane is colorless. Why the color changed. Thank you
27 September 2020 3,216 3 View
I need to convert 1,2-dichloralkane to alaknediol using reflux condenser. The dichloroalkane is insoluble in water. Hence i need to take methanol/ethanol as solvent. For substitution reaction i...
14 September 2020 6,292 3 View
For instance, the 'Historical Archives' section of the 'Audio Visual Library of the International Law' website gives access to the negotiation documents related to various instruments of...
07 June 2020 3,135 3 View
Species level classification of mangrove around east coast
02 January 2020 7,810 3 View
My otherwise amorphous material is showing strong XRD peaks when in its nanoparticulate form...cant really guess the reason...need help
02 January 2018 3,668 6 View
In tissue processing, xylene is toxic and difficult to regulate end point (especially manual processing). mineral oil - isopropanol combination can be used effectively. but what processor uses...
21 December 2016 3,999 2 View
Cost of a valve is less compared to a turbine cost so can we match the enthalpy drop using a valve for approximate work done by a turbine. using valve we can easily change the enthaply drop.
26 July 2016 685 7 View
can entropy values be negative? what actually happens when the randomness is lost at the sorbent-sorbate interface?
21 June 2016 7,039 5 View
Need to image mesoporous silica nanoparticles using the TEM. Also, need high resolution TEM images to see the mesoporous structure. Kindly suggest what kind of grids to use. Thanks, Shatadru
02 March 2021 1,787 2 View
I anwar by adsorption or reaction ..but it is either more method...
02 March 2021 4,811 2 View
I took measurements of different concentrations of 15 nm and 5 nm Au nano particle solutions. I'm trying to determine which concentration I measured gives the best reading overall. I also...
02 March 2021 7,626 1 View
[Synthesizing Cu nanoparticles without using chemical reductants]
01 March 2021 8,359 1 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...
01 March 2021 3,703 3 View
I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?
01 March 2021 930 3 View
How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...
28 February 2021 7,397 8 View
Hi, I want to calculate the radial distribution function for water molecules around the Na+ ions adsorbed on the surface of a spherical nanoparticle using the gromacs trajectory dynamically? For...
28 February 2021 5,650 1 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View