Pleass what's the effect of changing salt template ratio in preparing porous carbon?

03 January 2024 0 6K Report

I had a laboratory course about synthesis of porous carbon but the salt template ratio was changed from 1:1 to 1:10. Why?

Badges
Science method

More Chinedu Onyeke's questions See All

If you have experience with implementation of Meshless Methods with Radial Basis Functions, can you please send me an email?

I am using radial basis functions for a current problem, but these basis functions do not satisfy the kronecker-delta condition like the finite element basis functions. I would like to have a...

19 March 2024 7,594 0 View

What is the connection between sizre of supercells, k points, cut off energy and convergence?

does increasing or decreasing size of supercells affect these in DFT calculation?

17 March 2024 7,374 3 View

A project in supercapacitors?

which carbonaceous material will be good to study the performance of carbon materials in supercapacitors?

17 March 2024 5,365 2 View

Please how do i describe the SEM images of these Porous carbon?

Are there specific things i must mention when describing these images/

03 January 2024 7,759 5 View

How can one differentiate between direct carbonized carbon and salt template method?

Hello, i prepared porous carbon using direct and salt template method. i thought the salt template should only give mesoporous carbon but i got hysteresis in the two methods. How do i explain that...

31 December 2023 6,474 4 View

What type of spectroscopic transitions is observed in NMR?

What are the typical excitation frequency

20 December 2023 7,922 2 View

Please why is the NMR considered a very low sensitive method when compared to other methods?

I heard it has to do with the population ratio, energy difference and Boltzmann factor.

19 December 2023 6,094 3 View

How do i explain SEM images of porous cxarbon?

How can i know if it microporous, mesoporous or macroporous or moixture by mere looking is there a way to analyse before further using physisorption?

10 December 2023 700 2 View

How do i Interpret the result olf TEM and SEM of csrbonaceous materials?

I want to know how i can use SEM and TEM micrographs to discuss mesoporous and microporous nature of materials

28 November 2023 378 1 View

How can Mott-Schottky Analysis be used to determine the flat band potential and donor density ?

how exactly cab be used for example in this case

24 November 2023 8,407 0 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

Basis set and input instruction to calculate HOMO and LUMO using Orca for Imidazolium based organic salts?

Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...

09 August 2024 5,444 7 View

Do interactions between biosphere, carbon cycle, & water cycle impact global warming & interaction between atmosphere & hydrosphere?

How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?

09 August 2024 3,291 2 View

Who of all of you will help TPEOM to re-originate the Earths atmosphere to it original 5 atmospheric elements/gases?

Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...

06 August 2024 8,716 0 View

Project/Experimental assistance ？?

Do experiments on behalf of Our Business: Laboratory animal rearing Animal modeling Experimental animal behavior detection, image ultrasonic detection, electrophysiology platform Organoid...

05 August 2024 5,829 1 View

Short Synthesis of Graphene Oxide from Natural Graphite Flakes?

I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...

01 August 2024 8,368 2 View

Is the mentioned CV graph a valid one as this graph have only one peak prominent (reduction)?

I have used Prussian blue nanoparticles as a redox couple. The PBNPs have been made using only one salt precursor. Also, during scan rate studies, a small oxidation peak can be consistently found...

31 July 2024 9,697 0 View

How can I separate graphene from amorphous carbon of similar particle sizes?

The starting material is a finely ground powder. Some particles contain more graphene than others.

30 July 2024 3,978 2 View

Question about combustion Kinetics ?

I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...

30 July 2024 6,137 0 View