Hi,
Am using Electrochemical workstation 660E,
Am not able to get X and Y axis values, have tried from rebooting the system to deleting the regedit includes deleting old data.
if someone faced the same issue please let us know.
please find the attached files.
Please check if the decimal separator is as it should be in the system options. I recall us having a similar issue with an older CHI potentiostat some years ago - AFAIR, it was due to us changing the regional options (and decimal separator).
I will post screenshots of our CHI 660e config on monday - should help you verify if the CHI software has no accidental misconfiguration.
Dear Manohar Raju,
You have to read this manual for complete information of your instrument and software version.
http://old.vtpup.cz/common/manual/PrF_labsystruktan_CHInstruments_600C_manual_EN.pdf
You should select the separator (comma, TAB, space, or linefeed) to be used between X and Y data colummns. This will allow you to make the data format compatible with other commercial software, such as spread-sheet and data base handlers.
Good Luck.
Dear Pankaj
It was not about the separator (Comma, Tab, Space ), that was about the potential voltage on x-axis and current on y-axis which disappeared on my system but when i used the same .bin file into other system it was showing the values of X and Y axis.
- Badges
- Science topic
- Similar topics
- Chemistry
- Electrochemistry