Where can I find the spike protein amino acid sequence of SARS COV-2 variant B.1.1.7?

I need the spike protein amino acid sequence of SARS COV-2 variant B.1.1.7 (also named as VUI 202012/1)

29 December 2020 2,409 3 View

How to identify GC peaks for FAME mix which do not match reference peaks?

Hello, I am analyzing 37 component FAME mix using GC. I have got 37 peaks and 25 of them show expected order and height. However, others are not in the similar order with the reference for same...

22 November 2020 7,033 4 View

I am looking for a suggestion, how to model 3D layer soil profile of pile on Abaqus?

I am working on numerical modelling of the pile on layer soil using Abaqus. I want to do a 3D model of the pile, thus I have used C3D8R solid element to model the soil around the pile. My...

13 October 2020 7,296 3 View

What is the best procedure to extract bast fibre from plant bark having higher lignin content?

I have tried to extract fiber from the plant bark having higher lignin content with all traditional fiber extraction methods as well as treated up to 20% NaOH Solution at 100 Degree C. However...

04 October 2020 8,149 1 View

How to solve characteristic equation of free vibration of beam using "fzero" function in MATLAB ?

Hello every one, I am solving a Euler-Bernoulli Beam equation for a free vibration system. The beam is supported on an elastic soil. To solve the characteristic equation i have use "fzero"...

11 August 2020 8,649 2 View

How much is the EELS plasmon peak reliable for calculating Fermi energy level for alloys and compounds?

In general the low loss electron energy loss peak contain the information about the electronic structure of materials. From free electron model (Drude Model) the plasmon energy is given by a...

26 May 2020 6,315 3 View

A vaccine effective in monkey against corona virus can be 100% effective in human?

An experimental COVID-19 vaccine protected monkeys from pneumonia and prompted a strong immune response in the animals. Vincent Munster at the National Institute of Allergy and Infectious...

15 May 2020 7,939 6 View

What is the difference between drug loading and Entrapmet Efficiency of drug?

During characterization of Nano-particles, i often get confused between these two terms. Please suggest.

23 April 2020 5,178 1 View

Zeta potential of nanoparticles apart from polymers depends on which factors?

Basically i prepared PLGA based nanoparticles by QbD approach. As Zeta potential is a Critical Quality Attributes(CQA) i have to explain the effect of CMAs and CPPs on CQA. Due to PLGA polymer,...

15 April 2020 5,035 5 View

Do we always need to have error degree of freedom greater than 12 to start our research ?

I have attended different universities during my study programme and for different conference and seminars, where I notice a critical number always suggested by almost every scientist/professors...

03 December 2019 420 3 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

How climate change will influences human and animal behavioral change?

The role of climate change influencing the human behavior as well as economics interest

01 June 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

i have some problem with chtMultiRegionSimpleFoam

--> FOAM FATAL ERROR: Maximum number of iterations exceeded From function Foam::scalar Foam::species::thermo::T(Foam::scalar, Foam::scalar, Foam::scalar, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar, Foam::scalar) const, Foam::scalar (Foam::species::thermo::*)(Foam::scalar) const) const [with Thermo = Foam::hConstThermo >; Type = Foam::sensibleEnthalpy; Foam::scalar = double; Foam::species::thermo = Foam::species::thermo >, Foam::sensibleEnthalpy>] in file /home/ubuntu/OpenFOAM/OpenFOAM-4.1/src/thermophysicalModels/specie/lnInclude/thermoI.H at line 66. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::calculate() at ??:? #3 Foam::heRhoThermo >, Foam::sensibleEnthalpy> > > >::correct() at ??:? #4 ? at ??:? #5 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #6 ? at ??:?

24 March 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Hello fellow researcher .. What is the meaning of your name?

I would like to create a small guide containing the meanings of the names .. Thanks to everyone who cooperates with me in achieving it.

03 March 2021 5,266 4 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View