Measuring Young's modulus and other material properties of deposited thin films..?

08 August 2015 1 9K Report

Hi all,

Does anyone have idea about measuring Young's Modulus, Poisson ratio and density of deposited/grown thin films? What will be the best method to calculate all these?

Jose Joseph

Thank you Mr. Vladimir :)

Badges
Science topic

More Jose Joseph's questions See All

Anybody has expertise in wire bonding on polymer thin films, especially PVDF?

Hello all, I am looking at methods to take electrical connections from metal pads on polymer thin films. Our metal pad dimensions are less than 200 micron X 200 micron and therefore, conductive...

05 June 2019 6,052 3 View

Direct measurement of soil pH??

I have a problem in which I need to measure the pH of soil directly (without making any soil solution). Is there any method by which I can accomplish the same? I understand that this problem is...

10 November 2018 1,419 7 View

What is the easiest way to measure Boron doping concentration in a Silicon thin film deposited on glass/SiO2?

Dear all, Can anyone suggest me the easiest way to assess the boron concentration in a thin silicon film (50nm) deposited on a glass/SiO2 substrate? Will EDS in SEM help? There are literature...

06 July 2016 5,495 4 View

Will HCl affect Silver?

Did anyone studied the effect of HCl on silver thin films (appx. 100 nm)? I want to make top contacts on my MEMS device using Silver and keep the whole structure in dil. HCl for almost 3 hours as...

07 August 2015 3,288 0 View

Which metal gives best result for metal assisted chemical etching?

We are trying metal assisted chemical etching in our lab. Since the metal layer for this purpose needs to be too thin (few nm), the adhesion of metal to the silicon substrate is poor. We observed...

07 August 2015 1,720 4 View

Is amorphous silicon thin film (approx. 100 nm) optically transparent ?

I have deposited amorphous silicon thin film (appx. 100 nm) using PVD technique. Initial deposition trials were on silicon substrate and hardly I could differentiate the colour of thin film and...

06 July 2015 4,656 6 View

Any suggestions on the preparation of conductive SU-8?

I want to prepare a conductive SU-8 thin film. I have already tried preparing conductive SU-8 thin films by mixing CNT in SU-8 with different solvents. But none of these yield me a good and...

06 July 2015 198 4 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

RIA. How to measure?

When you use RIA, with a control the unknown sample with antibodies, you bare in mind the binding sites of the antibodies. However you still need to measure labelled antigen (radioactive) and not...

28 February 2021 2,133 3 View