Publication in Dental journals?

09 October 2016 8,847 0 View

Does anybody use ultrasonic probe sonicator?

04 May 2015 8,104 5 View

Does milling of treated alumina particles cause degradation or destruction of the silane layer?

I want to make milling for treated alumina due to agglomeration after drying in oven.

31 December 2014 3,639 1 View

Can you help me to avoid porosity in PMMA?

I mix PMMA with Benzoyl peroxide, and then add EGDMA to MMA. Finally, I mix the mixture with the liquid and subject it to heat treatment. Porosity about 15%.

31 December 2014 3,489 4 View

Can core/shell method be applied in MMC and CMC?

Can core/shell method be applied in MMC and CMC?

31 December 2014 839 1 View

What is the best coupling agent to mix alumina nanoparticles with a polymer?

I use Poly(methyl methacrylate).

31 December 2014 7,369 4 View

How do I calculate porosity using water?

I want to calculate porosity in PMMA samples.

31 December 2014 3,793 17 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How to grow E.coli on the low salt LB agar plate with 50 or 100ug/ml of Blasticidin?

Hello, I would like to ask how to grow E.coli which resists 50 or 100ug/ml of Blasticidin. I have tried many methods by using low salt Luria-Bertain(LB) agar plate. However, no colonies grow. Let...

01 March 2021 2,027 2 View

Distribution of particles in metal matrix?

How would define the "good" and "poor" distribution of particles within the matrix. Is there a quantitative solution to assess the distribution of the particles, which then having denotation of...

28 February 2021 7,397 8 View

RIA. How to measure?

When you use RIA, with a control the unknown sample with antibodies, you bare in mind the binding sites of the antibodies. However you still need to measure labelled antigen (radioactive) and not...

28 February 2021 2,133 3 View

How to Eliminate cosine error and abbe error in LASER measurement system(for example Rhenishaw XL80)?

I like to do project in laser measurement system. My objective is to eliminate or reduce the cosine error, abbe error in Laser measurement system. I have Rhenishaw XL80 system. Please tell the...

28 February 2021 4,890 3 View