List of binders or Plasticizers to make semiconductor based Ink?

Rana Muhammad Yousaf Saeed @Rana_Muhammad_Yousaf_Saeed

01 January 1970 0 761 Report

Greetings,

Can you please let me know which plasticizers and binders i can use to formulate an ink having semiconductor in it?

Badges
Science topic

More Rana Muhammad Yousaf Saeed's questions See All

What is the Mobile Phase for Methylene Blue Dye HPLC Analysis?

Please help me to find the Mobile phase for methylene blue dye to conduct the HPLC test.

04 May 2019 1,146 3 View

Is it possible to Dissolve NiS into Alginate hydrogel?

08 September 2018 8,425 3 View

Require Literature on 3d ink Printing on Papers?

Greetings, I wanted to have some literature on 3d Ink Printing on papers or fabrics. Please share some knowledge on it. Thanks.

08 September 2018 4,838 0 View

Dispersion of MoS2 in NMP Solvent?

Hi, What will be the process to obtain uniform dispersion of MoS2 in NMP solvent? Thanks.

08 September 2018 9,052 1 View

Solvents for NiS (Nickel Sulfide)?

Greetings, I'll appreciate your answers. Please list the solvents that can dissolve NiS. Thanks.

05 June 2018 8,386 8 View

List of solvents for g-C3N4 (bulk) required?

Greetings, I seek help in order to make a list for solvents for g-C3N4 (Bulk)

05 June 2018 474 0 View

Why it is not possible to Functionalize Metal Sulfides with any Aerogel like Metal Oxides?

Metal oxides can be functionalized easily with any matter but why it is not possible to functionalize metal sulfides with materials such as for example their fictionalization with an Aerogel?

31 December 2017 8,767 3 View

List of solvent for Ethyl Cellulose?

What kind of solvent system will be ideal to dissolve Ethyl Cellulose completely. The second part of this question would be to figure out which solvent system would be an ideal one for making the...

10 November 2017 4,160 7 View

Will you recommend SEM or Atomic Absorption Spectroscopy or other Analysis?

I Want to find concentration of Catalyst "X" in carrier Gel "Y". For this purpose, i have to run 5-7 samples, so which anaylsis will be better to find out the concentration of a catalyst in...

10 November 2017 9,492 0 View

How to synthesize PANI (Polyaniline) in NMP solvent?

Greetings, I wanted to know how can i make PANI conductive polymer in NMP solvent using HCL and Ammonium per sulfate technique.

01 January 1970 6,106 0 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

Are there lab markers/pens resistant to Roti-Histol?

Hi, I'm looking for a pen/marker to write on the smooth, transparent (non-frosted) part of microscopy slides which does not get washed away by alcohols and most importantly Roti-Histol. I want to...

24 February 2021 9,902 5 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

How to formulate Energy minimization in Molecular dynamics simulation for alloys using meam potential?

during MD simulation, the atoms are not moving as per required. The problem (as per my observation) lies in energy minimization technique. upon application of tensile strain in x or y direction,...

22 February 2021 380 5 View

How can we determine the band gap of a composite material that is made up of a composition of direct and indirect band gap semiconductor materials?

I have a direct band gap material and an indirect band gap material. If I made a composite of both through physical mixing. Then how can I determine the band gap of such a material as the Tauc...

17 February 2021 8,104 4 View

Formulate model for one integer optimization?

I am working on one optimization problem. the model with two states, the transition between the two states based on one threshold value (L = 5, which L< 5 -> Normal state, L== 5 ->...

11 February 2021 4,045 3 View

Anyone knows about how to stop pH getting acidic after 7 days formulating the formulation?

i am trying to formulating one formulation but the problem i am facing is after formulating and adjusting it's pH, when i try to check pH after 7 days it is getting down towards the acidic side....

02 February 2021 9,343 3 View

What could be possible reason of higher Drug Concentration of Liposomal formulation stability samples over time?

Hello Everyone! I have prepared liposomal formulation using Rotary Evaporator method followed by dialyzed the liposomal Suspension in Phosphate buffer to remove the un-encapsulated drug. After...

25 January 2021 7,752 4 View

Guide to getting started with semi-solid formulations?

Hello everyone. I'm a pharmaceutical scientist whose experience is exclusively in solid dosage form. I'm starting a project that involves a semi-solid (cream) formulation, but I can't find a lot...

24 January 2021 4,055 3 View