Lisrel path analysis and t values error?

More Kemal Elciyar's questions See All

When simulating the turning process in Abaqus, I cannot see chip formation in the results. What should I do?

Hi everyone, I am a beginner in ABAQUS and have modeled a turning operation using dynamic explicit. The results are kinda meaningful but it does not display the chip formation at all. 1-The...

14 June 2024 2,100 2 View

How to measure seepage through embankment dam which is under construction practically on site?

dam which is under construction has seepage problem in internal clay core and the dam made slide now. am interested to study these failure and needs different techniques to measure the seepage...

02 April 2023 2,641 0 View

Hi All, How can quantity of seepage on embankment dam under construction analysed?

am working my research on evaluation of seepage and slope stability analysis of embankment dams . the dam is under construction and the dam clay core made slide due to different reasons. some of...

14 February 2023 3,435 3 View

I have a fully converged CFD simulation in Fluent. The total mass imbalance does not match with what i calculate on my own using surface integrals?

My combustion simulation is fully converged. The mass imbalance that Fluent calculates is 3×10^-9. However, if i calculate the mass imbalance from the average surface integrals, as...

13 January 2023 1,619 7 View

Does R automatically create dummy variables?

I want to do logistic regression analysis in R studio with glm function. I have categorical independent values as lithology, land use, aspect. I would like to be sure that does r automatically...

11 December 2021 1,859 5 View

What is the range for the Transformed Vegetation Index (TVI)?

Hello, I"ve been wondering if anyone knows of a reference that lists the range for TVI. I could reason from the formula that it should be from 0 to ~1.22 since the range for NDVI is between -1 and...

07 May 2020 729 4 View

Can you determining Inventory Model (Continous vs Periodic) based on material consumption historical data?

Hello fellow researchers. I want to have your insigth on the categorization of inventory model based on demand pattern data. i have 8 item in different consumption value class and of course...

24 February 2020 5,969 3 View

Is There any rule of thumb for categorizing inventory model/system based on variation of demand and goods value?

Dear fellow researcher Currently im working on my thesis about inventory management policy in raliway industry in indonesia. this company has just started 7 month ago, so probabbly the data that...

09 January 2020 1,285 4 View

Should I remove zooplankton present in the incubation bottle when measuring primary production rates?

I am wondering if a high density of zooplankton may interfere with the measurement of primary production (either via C14 uptake or the oxygen method). Sometimes our samples have very high...

03 April 2019 9,793 6 View

How can I calculate the thermal conductivity of liquids flowing inside the tube in shell-and-tube heat exchanger?

I carried out an experiment consist of shell-and-tube heat exchanger, and collect the temperature data.Then I calculated the overall heat transfer coefficient and heat transfer rate of both...

09 February 2019 5,915 20 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View

Why does my protein refolded to beta sheet during thermal denaturation analysis?

Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...

06 August 2024 1,989 3 View