Is there anyone can help me with a software that can analyse seismic data acquired using Teraloc MK8?

11 August 2024 0 5K Report

I have already collected seismic data and need to analyse them. Please assist with the software that can also analyse the Peak Ground ACCERATION (PGA).

Badges
Science topic

Similar topics
Social Psychology
Attitude

Wave velocity and rock density paradox?

Practically it is known that seismic velocity increases as rock density increases, why then does the wave velocity equation involving elastic moduli and density indicate that velocity is inversely...

09 February 2021 1,843 3 View

How can the moment tensor inversion results can present good waveform fit (synthetic and observed waveform) from generalized Cut and Paste scheme?

Depending upon the distance of the seismic station from the epicentre, the quality of waveform data and the improvisation of the synthetic waveform on it is often a question. If the Pnl waveform...

31 December 2020 6,602 2 View

Petrel- well coordinates issue?

Hi, After loading 2D seismic lines in Petrel, I added three exploratory wells ( which supposed to be within the same 2D area) but these wells appears off the interesting area when I visualized...

25 October 2020 8,272 4 View

How to identify the appropriate sites and design a passive seismic survey in order to support the site characterisation?

In the case of overpopulated cities, how I can select the appropriate sites to do some field measurements "Passive Seismic Surveys"? How about the design of the survey in order to study the soil...

04 August 2020 5,253 4 View

Could someone suggest good journal/article realted to energy dissipation through hysteretic behaviour?

Currently I am working on " Quantitative Assessment of dissipated energy from structural components correlation with deformation under seismic loads in low rise building using Perform 3D".

13 July 2020 3,330 2 View

What are the methods that can be used to predict the reasons behind bad seismic quality?

I will be highly appreciated if I get your answers in details.

15 June 2020 4,888 2 View

How to calculate the seismic force for a Pushover analysis and how to insert it in ETABS ?

One of the important ways in designing buildings with earthquake effects is through the American Seismic Code According to the attachment

20 April 2020 682 3 View

How should I calculate the seismic design loads for a short term service year i.e., 10 years ?

Based on ASCE7-10 provisions, seismic forces are calculated based on 2% probability of exceedance within a 50-year period (a mean recurrence interval of about 2475years). Due to the short...

13 April 2020 1,527 9 View

How to calculate the seismic force for a Pushover analysis and how to insert it in Abaqus ?

Hi everyone, Iam performing a pushover analysis on historic masonry structure and i would like to be sure that the lateral seismic force calculation is correct. 1- I calculated the lateral...

13 April 2020 2,071 3 View

How do I compute a coherency and semblance attribute (3D volume) from 3D seismic data?

I want to write a code to generate coherency volume to detect faults in the data . For that I want literatures to find algorithm and concepts or any type of help in this regard.Thank you .

26 March 2020 3,692 6 View