I am searching for the main question "why we need to study SPR"
1. Is commercially available SPR devices are not giving enough sensitivity?
2. What is the need of SPR market for improvement?
3. main objective to study SPR
Dear Tanwin Ashrafi . See the following useful RG links: Article Sensitivity Comparison of Surface Plasmon Resonance and Plas...
Article A study of surface plasmon resonance (SPR) based biosensor w...
Conference Paper Parameter sensitivity analysis of surface plasmon resonance ...
Kindly see also the following useful RG links: Article Detecting Phase Shifts in Surface Plasmon Resonance: A Review
Article High-Sensitive Surface Plasmon Resonance Imaging Biosensor B...
Article Recent advances in surface plasmon resonance imaging: Detect...
Article Numerical Analysis of a Highly Sensitive Surface Plasmon Res...
Also check please the following useful RG links: Article Surface Plasmon Resonance: A Versatile Technique for Biosens...
Article On the Use of Surface Plasmon Resonance-Based Biosensors for...
Article Recent progress in surface plasmon resonance based sensors: ...
Article Design and analysis of biosensor based on surface plasmon resonance
The following RG links are also very useful: Article High-sensitivity integrated devices based on surface plasmon...
Article Surface Plasmon Resonance: Material and Interface Design for...
http://nopr.niscair.res.in/bitstream/123456789/57730/1/IJPAP%2059%287%29%20483-489.pdf
Article Enhancing Surface Plasmon Resonance Detection Using Nanostru...
https://www.academia.edu/33056399/Sensitivity_enhancement_methods_for_surface_plasmon_sensors
https://eprints.ucm.es/45330/1/Alda_high%20sensibility-sensor_photres2017.pdf
You can try SPR based sensor for allergens detection. Biosensors and Bioelectronics, 88, 109–113 (2017) by Ashley, J., Piekarska, M., Segers, C., Trinh, L., Rodgers, T., Willey, R., et al. (2017).
Hi there, I hope everything goes well. I want to be familiar with molecular dynamics and Coulomb Explosion Imaging (CEI). Could you please explain what COLTRIMS, VMI and TOFMS do? and in which...
08 November 2018 1,272 1 View
I would like to represent my qRT-PCR results in a bar plot but I am not sure to use SEofdiff or SEM as error bar?
08 July 2018 506 6 View
What is "refractive index (n) " of NiO Vs wavelength?
25 May 2017 4,865 3 View
07 April 2017 8,819 1 View
hello every body i want to design primer for my sequences but because of cross-pollination nature of my plants (Thymus sp) my sequences are heterozygot (they have SNP). I tried to design primer...
15 February 2017 3,653 3 View
How can I find MgO band gap experimentally? it is a wide band gap material and it's UV spectra placed out of range of UV-vis Perkin spectrophotometer. So it is not possible to calculate by Tauc...
09 November 2016 1,452 4 View
I have force and displacement data of 15 loop of cyclic loading in excel file. How can I calculate the Hysteresis area in every cycle (the area between loading and unloading in cyclic loading in...
13 December 2014 1,540 17 View
17 September 2014 1,596 7 View
i am performing SPR experiment and i am referring some journal and websites they stated regarding coupling buffer and immobilization buffer so ihave confusion about these buffer.
06 December 2020 470 3 View
I am working on a PCF based plasmonic sensor for refractive index detection. The work is simulation based using COMSOL Multiphysics software. Theoretically how can I calculate the efficiency of...
29 November 2020 2,575 4 View
Hi, I am planning on running some protein-protein interaction/kinetics studies using the Nicoya COOH sensors in OpenSPR. I am looking for the activation and blocking buffer composition that are...
01 November 2020 262 1 View
what is a proper protocol i can follow for an experiment regarding nano fabrication of hollow structures in SPR? , for example the methods and the instruments needed, chemical solutions, etc, and...
05 September 2020 4,468 3 View
Hi, I am looking for substantial evidence of effect of geomerty of flow channels (microfluidics) on the sensitivity and feasibility of Surface Plasmon Resonance (SPR) Biosensors with respect to...
31 August 2020 6,049 3 View
Which are the main limitations of SPR comparing with BLI, especially in terms of buffer and matrix especially for liposome-protein interactions assays ?
13 August 2020 2,194 3 View
I Want to evaluate the binding affinity characterization and kinetic binding of the antibody coated on the nanoparticle. SPR, Blitz based experiments could help?
28 June 2020 8,579 3 View
I am planning to perform an antibody-ligand interaction study with SPR/Biacore. The idea is to immobilize my antibody with Protein A/G. It would be great if you could share your comments, what to...
23 June 2020 7,705 3 View
Hello, As a newbie to SPR, I've been having problems with optimizing aptamer-protein binding on an NTA chip. My protein has a his-tag on it. Any help would be greatly appreciated. Question 1:...
14 June 2020 4,586 3 View
I have designed a SPR chip by using normal glass slide(Blue star No. 4slide)/Cu(5nm)/Ag(50nm). But it shows very less depth in the reflectance curve at resonance angle. What should be the reason ??
13 February 2020 3,770 4 View