I am trying to design a vertical grating coupler in the visible wavelength. Shall I expect same response for coupling for both chip to fiber and fiber to chip cases? Currently, the response I am getting is not overlapping.
I want to develop a hydrogeological model, therefore, I want to make a raster with specific row and column and it need to have a particular projection using python. So that, I can add different...
06 February 2023 9,091 3 View
I want to change the liquid property in TRACE/Relap5 model. Basically, I want to add nanofluid with water for simulating reflood/rewet.
07 June 2022 1,409 0 View
How to condition a new C18 column? What are the prerequisites and cautions? What are the solvent concentrations you suggest?
21 February 2022 3,665 3 View
What is the reason of such solvent peaks and noise? Are they indication of any peak? Can these peaks be taken or considered? If not, what can be done?
16 February 2022 7,335 2 View
Can you please help me with some information? I am only in the primary stage of learning EFA, CFA and SEM. Can you please tell me what should be the sequence of performing these? I have survey...
02 November 2021 8,041 9 View
I'd really appreciate it if you could perhaps talk about how the topic relates to stock market efficiency and investment decisions.
13 September 2021 1,639 3 View
I have studies some papers on the use of nanoparticles for treatment of corona. Can you please explain the utility of using this?
09 August 2020 3,784 8 View
Preservation of natural food color
09 August 2020 8,149 1 View
What is the minimum percentage of fatty acid required in FAME for producing biodiesel?
08 August 2020 872 8 View
hi, we would like to proceed with you on this project with the view to working with you further depending on this project. before we commence we just want to make sure that we are all on the...
26 April 2020 8,719 1 View
I have protein-membrane simulations (PDB, PSF, DCD) and have noticed that water molecules near the protein are not visible in the simulations. How can I fix this issue? Is there a way to place the...
04 August 2024 1,200 2 View
I'm researching light sources and their UV emissions. I'm curious if a 50W, 7500K conventional LED lamp emits any UV light. I found that a 200W tungsten lamp can emit up to 1.5 mW/cm² at 350 nm....
31 July 2024 3,843 7 View
How far is the distance with question marks on it? There is a river, where you measure at the point out to the right and there is a low screen. The river is green, what is visible is within the...
24 July 2024 4,405 1 View
Hi there, I'm new to modelling with comsol. I would like to ask if it is possible for comsol to output linearly polarized (LP) modes? I tried modelling a simple single mode fiber with an enlarged...
23 July 2024 4,019 3 View
I used MDCK cells for my plaque assay for influenza virus and seeded 950,000cells/well in 6-well two days before infection. The virus was diluted in FBS-free MEM with 0.5ug/ml TPCK-trypsin. Here...
11 July 2024 5,669 5 View
I'm having a bubbling error while splicing 100/350 um optical fiber (core/cladding) on the Fujikura FSM100P+. I have tried some ways such as changing Prefuse power and Prefuse time but to no...
03 July 2024 7,463 6 View
I am trying to visualize Nemaline Rods in Skeletal Muscle fiber cross sections. I have read about 10 different gomori protocols, and the protocol seems very straightforward. Every paper I read on...
27 June 2024 5,423 2 View
The reflexes within the measured XRD pattern are not clearly visible or fully indicated, and a legend is missing. explain this.
27 June 2024 7,257 3 View
fiber powders will be used as a reinforcement.
23 June 2024 10,027 3 View
When I examined the GIXRD data obtained recently, I observed that the sample treated with O2 plasma on the Cu surface deposited on Si chips showed increased intensity compared to the sample...
19 June 2024 6,900 5 View